Specials

• universal, can be used for many filters
• spring loaded, self contracting

Technical data:

• in plastic case

scope of delivery:

• 4 bits, 6.3 mm (1/4") drive, cross slot PH: PH0 - PH1 - PH2 - PH3
• 4 bits, 6.3 mm (1/4") drive, cross slot PZ: PZ0 - PZ1 - PZ2 - PZ3
• 4 bits, 6.3 mm (1/4") drive, slot SL: 3 - 4 - 5 - 6 mm
• 6 bits, 6.3 mm (1/4") drive, T-Start (for Torx): T10 - T15 - T20 - T25 - T27 - T30
• 5 bits, 6.3 mm (1/4") drive, internal hexagon : 2 - 3 - 4 - 5 - 6 mm
• 4 bits, 6.3 mm (1/4") drive, square (for Robertson): 0 - 1 - 2 - 3
• 1 bit ratchet adaptor, external hexagon 6.3 mm (1/4") - external square 6.3 mm (1/4"), length 24,5 mm
• 9 sockets, hexagon, 6.3 mm (1/4") drive, sizes: 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 mm
• 1 ratchet spinner handle for bits, reversible, 6.3 mm (1/4") drive, length 125 mm

Technical data:

• 2-component anti-slip handle
• with suspension hole

Technical data:

• for testing of the exhaust back pressure
• to be connected to oxygen sensor thread of the exhaust system or to flange of exhaust gas recirculation valve
• allows conclusions on blockages or constrictions, such as e.g. clogged catalysts or particulate filters, thereby preventing expensive repair costs due to damage to the turbocharger

scope of delivery:

• 1 adaptor for oxygen sensor thread M12x1.25
• 1 adaptor for oxygen sensor thread M18x1.5
• 1 flange adaptor for exhaust gas recirculation valve (EGR)
• 1 pressure gauge, 57 mm with two ranges in psi & kg/cm²
• 1 braided stainless steel casing hose, length 1.9 m

Technical data:

• for extracting / pulling ball joints of e.g. anti-roll bar, control arm, tie rod and other ball joints
• suitable for many automobiles and light trucks from Ford, Volkswagen, Mercedes-Benz, Audi, Skoda, Citroen, Peugeot, Renault, Fiat, Mazda, Toyota etc.
• also suitable for pulling bearings and bushings

scope of delivery:

• 2-arm tie rod ball joint & drop arm puller
  • opening: 33 mm / width: 28 mm
  • opening (inside): 55 mm / height (inside): 55 mm
  • spindle: M16 / drive: 19 mm outer hexagon
  • forged & galvanized
• 2-arm tie rod ball joint & drop arm puller
  • opening: 18 mm / width: 18 mm
  • opening (inside): 45 mm / height (inside): 50 mm
  • spindle: M16 / drive: 19 mm outer hexagon
  • forged & galvanized
• tie rod ball joint extractor
  • opening: 18 mm / width: 28 mm
  • height: 50 mm / spindle M12 x 1.75
  • drive: 19 mm outer hexagon
  • forged & galvanized
• control arm ball joint & tie rod ball joint extractor
  • opening: 20-22 mm / length: 155 mm
  • extracting range: 2 steps max. 30 or 55 mm
  • drive: 21 mm outer hexagon
• 2-arm bearing puller, adjustable
  • leg wide: 16 mm / length: 160 mm
  • spindle: M14 / leg (inside): 75 mm
  • leg height (inside): 75 mm
  • drive: 17 mm outer hexagon

Technical data: