Specials

Impact Socket, Hexagon | 20 mm (3/4") Drive...

for both manual and impact wrenches
can be fixed on impact wrench by pin and O-ring

Technical data:

Output profile: Hexagon
Drive profile size, metric: 20 mm
Drive profile: Internal square
Material: Chrome Molybdenum Steel
Wrench size: 33 mm
Drive profile size, inch: 3/4 "
Gross weight: 500 g
Surface finish: Phosphated

RRP 21,71 EUR
Only 10,59 EUR

Flat Milling Drill Set | 10 - 25 mm | 6 pcs....

for drilling shallow holes with different diameters in soft and medium hard wood
also suitable as an accessory for electricians and other installers for drilling holes in wood for cables, pipes and other installations
with center point for fixing the drill on the workpiece
on both sides with angled sharp cutting edges for quick penetration into the wood
enables clean drilling
specially hardened for long service life
embossed size information on the drill bits
hexagonal shaft for use with three-jaw drill chucks
practical set composition with different diameters 10, 12, 16, 18, 20 and 25 mm

Technical data:

Packaging suitable for wall hanging: Yes
Material: Carbon Steel
Gross weight: 262 g
Diameter: 10 | 12 | 16 | 18 | 20 | 25 mm
Length: 150 mm

RRP 12,78 EUR
Only 5,50 EUR

Mini Body Sheet Shears | right cut | 195...

for cutting sheets made of stainless steel, steel, copper, brass, etc.
cuts up to 1.2 mm cold rolled steel or 0.7 mm AISI-304 stainless steel
serrated edged blades, forged, induction-hardened, chrome molybdenum alloy
2-component handles

Technical data:

Material: Chrome Molybdenum Steel
Gross weight: 240 g
Packaging suitable for wall hanging: Yes

RRP 35,70 EUR
Only 19,40 EUR

Impact Socket, Hexagon | 25 mm (1") Drive...

for both manual and impact wrenches
can be fixed on impact wrench by pin and O-ring

Technical data:

Surface finish: Phosphated
Drive profile size, inch: 1 "
Drive profile: Internal square
Material: Chrome Molybdenum Steel
Output profile: Hexagon
Gross weight: 1444 g
Drive profile size, metric: 25 mm
Wrench size: 55 mm

RRP 50,12 EUR
Only 31,30 EUR

Clutch Alignment Tool | for MINI

for aligning the clutch
required when installing a new clutch in a 6-speed manual transmissions

suitable for following vehicle models:

MINI Cooper
MINI Cooper S

to be used as OEM 21 2 210 (83300494261)

Technical data:

To be used as OEM1: 212260 MINI
Gross weight: 1312 g

RRP 85,64 EUR
Only 56,60 EUR

Lock Ring Pliers | 220 mm

insulated handles
straight design
especially for lock / snap rings on axle and gear box shafts
can be used on lock ring openings larger than 3.65 mm

Technical data:

Gross weight: 290 g
Material: Chrome Molybdenum Steel
Surface finish: Chrome plated
Length: 220 mm

RRP 55,13 EUR
Only 35,39 EUR

Impact Socket Hexagon, deep | 12.5 mm (1/2")...

for both manual and impact wrenches
can be fixed on impact wrench by pin and O-ring

Technical data:

Wrench size: 11 mm
Gross weight: 160 g
Drive profile size, inch: 1/2 "
Material: Chrome Molybdenum Steel
Output profile: Hexagon
Length approx.: 78 mm
Drive profile size, metric: 12,5 mm
Surface finish: Phosphated
Drive profile: Internal square

RRP 9,27 EUR
Only 5,09 EUR

Engine Timing Tool Set | for VAG 2.4, 2.8,...

for checking and adjusting the engine timing on VAG 2.4, 2.8, 3.0L petrol engines

scope of delivery:

1 camshaft locking tool, to be used as OEM T40070
1 crankshaft pulley holding tool, to be used as OEM T10355
1 chain tensioner locking tool, to be used as OEM T40071
1 camshaft locking tool, to be used as OEM T40133
1 setting wrench for camshaft adjuster, to be used as OEM T40269
1 setting wrench for camshaft adjuster, to be used as OEM T40079
1 crankshaft rotating tool, to be used as OEM T40058
1 XZN bit socket 14 mm, length 45 mm, to be used as OEM T10035
1 XZN bit socket 14 mm, length 80 mm
1 crankshaft locking pin, to be used as OEM T40069
1 crankshaft locking pin, to be used as OEM T3242

Technical data:

To be used as OEM4: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Volkswagen
To be used as OEM3: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Skoda
To be used as OEM2: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Seat
Gross weight: 5110 g
To be used as OEM1: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Audi

RRP 271,36 EUR
Only 185,50 EUR

Infinite Scroll für Gambio