BGS-DIY

• is used to reset the brake piston when changing the brake pad
• with universal adaptor
• to be operated with T-handle or external hexagon 19 mm

suitable for the following models

• Audi: 80, 90, V8S, 100, A2, A3, A4, A6, A8, TT, Quattro
• Ford: Ford Sierra (ABS), Granada, Galaxy, Scorpio
• Honda: Prelude
• Jaguar: XJ4D
• MAZDA: 323, 326
• Mitsubishi: Galant GLSi
• Nissan: Silvia 1 B Turbo
• Rover: 800-series
• Saab: 9000
• Seat: Ibiza, Toledo, Leon, Arosa, Alhambra
• Skoda: Fabia, Octavia, Superb
• Subaru: L & Series 2
• Toyota: Celica, Corolla GT MR2
• Volvo: 440, 460, 480, S40, V40
• VW: Golf 3, Golf 4, Golf 5, Lupo, New Beetle, Passat, Polo, Sharan, Touareg, Touran, T4, T5, Quattro

scope of delivery:

• pressure plate
• combination adaptor
• right-handed thread

Technical data:

Packaging suitable for wall hanging: Yes
Gross weight: 990 g

• basic set for setting back the brake pistons
• right-threaded spindle
• suitable for the following models:
  
  • wind-back adapter 0: General Motors
  • wind-back adapter 2: Citroen BX(83),BX 16V(88-), Honda Prelude 2.0i, 2.3i, Mercedes-Benz
  • wind-back adapter 3: Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, Toyota, VW
  • wind-back adapter 4: Alfa Romeo, Fiat, Ford, Mazda, Saab 9000, Subaru
  • wind-back adapter 5: with 3/8” inner square
  • wind-back adapter 6: Nissan Primera, VW-Golf IV
  • wind-back adapter 7: Audi 80, 90, V8 + 100, Ford Sierra ABS + Scorpio ab 85, Honda Prelude, Nissan Silvia 1.8 Turbo, Rover 8000, Saab 9000, Subaru L + Z, VW Golf + Passat
  • wind-back adapter 8: General Motors
  • wind-back adapter 9: General Motors
  • wind-back adapter F: Renault
  • wind-back adapter A: Opel
  • holding plate: for all vehicles listed above

Technical data:

Gross weight: 1760 g

• basic set for setting back the brake pistons
• right-threaded spindle
• left-threaded spindle
• suitable for the following models: Alfa Romeo, Audi, Austin, BMW, Citröen, Ford, General Motors, Honda, Jaguar, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Opel, Renault, Rover, Saab, Subaru, Toyota, VW

Technical data:

Gross weight: 2440 g

• with black plastic handle

Scope of delivery:

• 1 brass brush
• 1 nylon brush
• 1 steel brush

Technical data:

Gross weight: 190 g
Length: 225 mm
Packaging suitable for wall hanging: Yes

• ball joint also allows sliding hammer to be used in confirmed areas
• allows easy and quick removal of the injector

scope of delivery:

• sliding hammer with shaft and handle, 4400 g
• ball joint adaptors
• adaptor (internal thread): M14 x M14
• adaptor (internal thread): M17 x M14
• adaptor (internal thread): M25 x M14
• adaptor (internal thread): M27 x M14
• adaptor (external screw thread): M27 x M14
• adaptor (external screw thread): M20 x M14
• sockets (slotted, hexagon) for electrical unit: 25 - 27 - 29 - 30 mm
• bit socket, 12.5 mm (1/2") drive, internal hexagon 10 mm

Technical data:

Gross weight: 8398 g

• flow back volume can be determined via glass tubes or measuring cups
• includes 6 glass tubes, 6 measurement cups with 0.70 m connecting hose, mounted on aluminium bar with hooks
• for common rail engines, up to 6 injectors
• suitable for various injector manufacturers
• includes 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch

Technical data:

Gross weight: 1690 g

• extra short: only 225 mm
• suitable for e. g. Bosch injectors built in BMW, Mercedes-Benz CDI engines OM 611, 612, 613, etc.
• total length 350 mm
• injector pulling claw, 13 mm pulling claw opening with internal thread M12 x 1.75
• injector tension bolt with external thread M17 x 1.0 & external thread M14 x 1.5 for ball joint adapter
• injector sleeve with internal thread M27 x 1.0 & male thread M14 x 1.5 for ball joint adapter
• adapter with external thread M12 x 1.75 for pull claw & external thread M10 x 1.5 for slide hammer
• adapter with external thread M12 x 1.75 for pull claw & external thread M14 x 1.5 for ball joint adapter
• ball joint adapter with internal thread M14 x 1.5 for pulling claw / tension bolt / tension sleeve & external thread M10 x 1.5 for slide hammer
• sliding hammer sliding bolt, Ø 14 mm with internal thread M10 x 1.5 for adapter / ball joint adapter & external thread M14 x 1.5 for handle
• handle length 74 mm, Ø 26 mm with internal thread M14 x 1.5
• sliding hammer weight 1730g with 14 mm bore

Technical data:

Gross weight: 4000 g

• special tool for making
  • single D-type flares
  • double E-type flares (SAE)
  • double F-type flares
• suitable for pipes with wall thickness up to 1 mm

scope of delivery:

• 1 basic device
• 1 clamping jaw
• 7 pressure pieces Ø 4.75 - 5 - 6 - 8 - 10 mm, 1/4" - 1/2"

Technical data:

Gross weight: 1220 g

• for electric drills
  
• for use on straight and bent surfaces
• crimped bristles
• 6 mm shaft

scope of delivery:

• pot brush, Ø 50 mm
• disc brush, Ø 50 mm
• wire pencil brush, Ø 25 mm

Technical data:

Packaging suitable for wall hanging: Yes
Gross weight: 170 g

• for loosening stuck wheel nut sockets on trucks and vans
• conversion 1:56
• including 7 sockets made from chrome vanadium steel
• Sockets, 25 mm (1") drive, hexagon 24 - 27 - 30 - 32 - 33 - 36 - 38 mm

Technical data:

Gross weight: 11540 g
Material: Chrome Vanadium Steel
Max. torque: 3200 Nm

• can be filled with 400 g grease cartridges (DIN 1284), bulk grease and filling device
• optional accessories: flexible delivery tube BGS 3066

Technical data:

Gross weight: 1248 g

• for assembling and disassembling of engines, gearboxes, rear axles etc.
• 4 ball bearing castors
• compact construction, lightweight
• extra long lifting height
• fast lifting due to hydraulic foot pedal

Technical data:

Gross weight: 30000 g
Rated load capacity: 500 kg
Lifting height: 1400 - 1950 mm

• for assembling and disassembling of glow plugs and the professional repair of glow plug threads

scope of delivery:

• extractor for very firmly seated glow plugs
• step drill for disassembly of glow plugs 7 x 5.5 mm and 9 x 5.5 mm
• thread cutters M8 x 1.0, M10 x 1.0 and 6.3 mm (1/4") - 28 UNF for re-cutting the glow plug threads
• holder for thread tap with ratchet function
• insert E10

Technical data:

Gross weight: 1800 g

• for dismantling of bearings installed in a blind hole
• is used when repairing gearboxes, for example

scope of delivery:

• slide hammer, length 290 mm
• 2-feet puller with spindle
• spreader claws for bearings with inner diameter of 5 - 52 mm

Technical data:

Gross weight: 5690 g

scope of delivery:

• hydraulic spindle
• traverse 100 mm
• traverse 150 mm
• traverse 200 mm
• headpiece for 2-legs pullers
• headpiece for 3-legs pullers
• 2 extensions
• 2 separators from 20 - 105 mm

Technical data:

Gross weight: 17500 g

• suitable as inside and outside puller

scope of delivery:

• 3 puller arm sets (3 pcs. per set) for clamping depth of 100, 200 and 300 mm

Technical data:

Max. clamping width: 135 mm
Hex drive size: 17 mm
Hooked footh: 9 mm
Hook foot thickness at the top: 3,5 mm
Min. clamping width: 35 mm
Spindle length: 450 mm
Gross weight: 8560 g
Hook length: 12 mm

• suitable for removing bearings, bushings, sleeves, etc.
• especially suitable for dismantling blind holes

Scope of delivery:

• sliding hammer 1430 g, 370 mm
• Spreader claws, 10-14 mm
• Spreader claws, 15-19 mm
• Spreader claws, 18-25 mm
• Spreader claws, 25-32 mm

Technical data:

Gross weight: 3870 g

• with double ball joint and clip
• extendable up to 476 mm
• mirror Ø 30 mm

Technical data:

Gross weight: 40 g
Packaging suitable for wall hanging: Yes

• for disassembly and assembly of air conditioning clutches

suitable for the following air conditioning compressor clutches:

• Saden SD5, SD7, SD 505, 507, 510, 575, 708, 709
• Zexel (Mitsubishi)
• Nippon Denso 6P, 10P
• Chrysler C171
• Ford FS6
• Hitachi MJ
• Tecumseh HR 980
• Delphi / Harrison (GM) R4, A6, HR-6, V5, DA6

Scope of delivery:

• adjustable pin wrench
• clutch friction plate puller
• Puller plate (2/3 holes), with spindle and mounting screws
• disassembly / assembly tool, SAE thread, ball bearings
• disassembly / assembly tool, ISO thread, ball bearings

Technical data:

Gross weight: 2340 g

• is required when repairing engines
• contains important tools for cleaning piston ring grooves, assembly of piston rings, pre-stressing piston rings when mounting the pistons

scope of delivery:

• piston ring tension band 53 - 125 mm, height 75 mm
• piston ring tension band 90 - 175 mm, height 100 mm
• piston ring tension band 90 - 175 mm, height 150 mm
• ring groove cleaner from 1.2 to 5.5 mm
• cleaning attachments for different ring groove widths
• piston ring assembly pliers 50 - 100 mm
• angled screwdriver

Technical data:

Gross weight: 2930 g

• for testing the compression on diesel engines
• allows professional examination and assessment of the engine condition
• includes test tools for many vehicle models

Scope of delivery:

• pressure gauge 70 bar, with 500 mm hose
• glow plug adaptor, M8 x 1.0, length: 104 mm
• glow plug adaptor, M10 x 1.0, length: 84 mm
• glow plug adaptor, M10 x 1.0, length: 92 mm
• glow plug adaptor, M10 x 1.0, length: 113 mm
• glow plug adaptor, M10 x 1.0, length: 120 mm
• glow plug adaptor, M10 x 1.25, length: 65 mm
• glow plug adaptor, M10 x 1.25, length: 137 mm
• glow plug adaptor, M12 x 1.25, length: 48 mm
• injector adaptor, M22 x 1.5, length: 117 mm
• injector adaptor, M20 x 1.5, length: 77 mm
• injector adaptor, M22 x 1.5, length: 74 mm
• injector adaptor, M24 x 1.5, length: 88 mm
• injector adaptor, M24 x 2.0, length: 66 mm
• injector adaptor pipe, M18 x 1.5, length: 160 mm
• bracket for injector adaptor pipe
• sealing cone & sleeve for injector adaptor pipe

Technical data:

Gross weight: 3384 g

• for easy and quick removal of tie rods and carrier joints
• narrow profile, suitable for most vehicles
• three pull-out feet sizes for use on most passenger cars, and light industrial vehicles

scope of delivery:

• puller foot, opening 23 mm, puller width 55 mm
• puller foot, opening 28 mm, puller width 55 mm
• puller foot, opening 34 mm, puller width 63 mm

Technical data:

Material: Carbon Steel
Gross weight: 3160 g

• heavy duty version with 152 mm pressure fork opening
• the set includes all the necessary sleeves and pressure pieces for changing the ball joints on most US vehicles, e. g. GM, Ford and Dodge 2WD and 4WD pick-ups up to 1997
• can also be used on many European SUV cars and vans

scope of delivery:

• pressure spindle, 230 mm
• pressure spindle arm
• pressure bolt for pressure spindle, length 6.4 / 19 mm
• collection sleeve 44.5 x 50.8 mm
• collection sleeve 57.2 x 63.5 mm
• collection sleeve 69.9 x 76.2 mm
• holding sleeve 57.2 mm
• holding sleeve 44.5 mm
• holding sleeve 36.5 mm
• holding sleeve 69.9 mm
• adaptor for reception bushes 50.8 mm
• receptacle cup 50.8 mm
• receptacle cup 66.7 mm
• receptacle cup 31.8 mm
• receptacle cup 44.5 mm
• assembly cup 44.5 mm

Technical data:

Gross weight: 12908 g

• suitable for panel beating hammer BGS 1864

Technical data:

Gross weight: 30 g
Colour: Yellow
Head diameter: 30 mm

• is used for replacing valve stem seals
• suitable for all standard vehicles

scope of delivery:

• disconnecting pliers
• assembly pin
• Adaptor 5 mm
• Adaptor 5.5 mm
• Adaptor 6 mm
• Adaptor 6.5 mm
• Adaptor 7 mm
• Adaptor 8 mm
• Adaptor 10 mm (3/8")

Technical data:

Gross weight: 1760 g

• for fast and easy diagnosis of combustion chamber leakages, e. g. leaks in inlet and outlet valves, cylinder head gasket and piston rings
• shows the pressure drop as a percentage and enables an acoustic test
• suitable for petrol engines with spark plug thread M12 x 1.25 and M14 x 1.25

scope of delivery:

• adaptor M12 x 1.25, metric
• adaptor M14 x 1.25, metric
• hose extension with quick coupling
• measuring unit with compressed air regulator, leakage and pressure indicator
• hose adaptor

Technical data:

Gross weight: 1792 g

• to be used as OEM 2064 - 3242 - 3359 - 3366 - 3369 - 3418 - 3458 - 2065A - T10008 - T10016 - T10020 - T10050 - T10060A - T10098 - T10100 - T10120 - T10121 - T10123 - T10264 - T10265 - T40011

suitable for the following VAG engines:

• 1.9 L /2.0 L TDI pump/nozzle
• 1.9 L TDI (conventional diesel)
• 2.5 L V6 TDI (not petrol)
• 3.3 L V8 TDI (not petrol)
• 1.2 L 3-cylinder and 1.4 / 1.6 L petrol engines

contains important adjustment tools such as:

• camshaft locking tools
• injection locking tools
• crankshaft locking tools
• injection nozzle wrench 22 mm

Technical data:

To be used as OEM2: T10123 | T10120 | 3458 | 3418 | 2065A | 3366 | T10098 | T10121 | 3242 | T10050 | T10100 | T10060A | T10020 | T10008 | T40011 | 3359 | 2064 | 3369 | T10016 | T10264 | T10265 Seat
To be used as OEM1: T10123 | T10120 | 3458 | 3418 | 2065A | 3366 | T10098 | T10121 | 3242 | T10050 | T10100 | T10060A | T10020 | T10008 | T40011 | 3359 | 2064 | 3369 | T10016 | T10264 | T10265 Audi
To be used as OEM3: T10123 | T10120 | 3458 | 3418 | 2065A | 3366 | T10098 | T10121 | 3242 | T10050 | T10100 | T10060A | T10020 | T10008 | T40011 | 3359 | 2064 | 3369 | T10016 | T10264 | T10265 Skoda
To be used as OEM4: T10123 | T10120 | 3458 | 3418 | 2065A | 3366 | T10098 | T10121 | 3242 | T10050 | T10100 | T10060A | T10020 | T10008 | T40011 | 3359 | 2064 | 3369 | T10016 | T10264 | T10265 Volkswagen
Gross weight: 4410 g
cdxi_thingPropertyValue: Audi|Seat|Skoda|VW

• for adjusting and checking the engine timing during tooth belt and camshaft replacement, etc.

suitable for the following models:

• Audi
  • A2 1.4 TDI (Bj. 2002 - 2006)
  • A3 1.9 / 2.0 TDI (manufactured 2002 - 2008)
  • A4 1.6 TDI (Bj. 2002 - 2005)
  • A4 1.9 / 2,0 TDI (manufactured 2004 - 2008)
  • engine codes: AMF, ASZ, ATD, AVB, AVF, AWX, AXR, AZV, BHC, BKC, BKD, BKE, BLB, BMN, BNA, BPW, BRB, BRC, BRD, BRE, BUY, BVA, BVF, BVG
• Seat
  • Altea 1.9 SDI / TDI (manufactured 2005 - 2008)
  • Leon 1.9 / 2.0 TDI (manufactured 2005 - 2008)
  • Toledo 1.9 SDI / TDI (Bj. 2005 - 2008)
  • engine codes: BJB, BKC, BLS, BMM, BXE
• Skoda
  • Fabia 1.4 TDI (Bj. 2003 - 2006)
  • OctaviaII 2.0 TDI (Bj. 2003 - 2006)
  • engine codes: AMF, AZV, BKD
• VW
  
  • Beetle 1.9 TDI (Bj. 2002 - 2008)
  • Bora 1.9 TDI (Bj. 2002 - 2008)
  • Fox 1.4 TDI (Bj. 2002 - 2008)
  • Golf 1.9 / 2.0 TDI (manufactured 2002 - 2008)
  • Lupo 1.4 TDI (Bj. 2002 - 2008)
  • Polo 1.4 / 1.9 TDI (manufactured 2002 - 2008)
  • Sharan 1.9 TDI (Bj. 2002 - 2008)
  • engine codes: AJM, AMF, ANU, ARL, ASZ, ATD, AUY, AVB, AVF, AWX, AXR, BAY, BMS, BNM, BNV, BWV

scope of delivery

• crankshaft locking tool, to be used as OEM T10100
• pump wheel / camshaft locking tool, to be used as OEM 3359, T20102, 9882, MB995206
• crankshaft locking tool, to be used as OEM T10050, 9883, 310-085, 23-059, MB995209
• 4 mm locking pin, to be used as OEM T10115, 303-1054, MB995208
• locking pin for V-belts, to be used as OEM T10060A, T40098

Technical data:

To be used as OEM2: T10100 | 3359 | T10050 | T10115 | T20102 | T10060A | T40098 Seat
cdxi_thingPropertyValue: Audi|Seat|Skoda|VW
To be used as OEM5: 9882 | 9883 Dodge
To be used as OEM6: 23-059 | 303-1054 | 310-085 Ford
To be used as OEM1: T10100 | 3359 | T10050 | T10115 | T20102 | T10060A | T40098 Audi
To be used as OEM4: T10100 | 3359 | T10050 | T10115 | T20102 | T10060A | T40098 Volkswagen
To be used as OEM3: T10100 | 3359 | T10050 | T10115 | T20102 | T10060A | T40098 Skoda
To be used as OEM7: MB995206 | MB995208 | MB995209 Mitsubishi
Packaging suitable for wall hanging: Yes
Gross weight: 430 g

Technical data:

Output profile: 12-point
Drive profile size, inch: 1/2 "
Drive profile: Internal square
Diameter: 75 mm
Drive profile size, metric: 12,5 mm
Gross weight: 100 g

scope of delivery:

• reversible ratchet, 12.5 mm (1/2")
• ring-ended spanner 27 mm
• oil filter cap, 12.5 mm (1/2") drive | 14-point Ø 65 mm
• oil filter cap, 12.5 mm (1/2") drive | 14-point Ø 67 mm
• oil filter cap, 12.5 mm (1/2") drive | 14-point Ø 74 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 75 mm
• oil filter cap, 12.5 mm (1/2") drive | 8-point Ø 74 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 74 mm
• oil filter cap, 12.5 mm (1/2") drive | 14-point Ø 73 mm
• oil filter cap, 12.5 mm (1/2") drive | 12-point Ø 75 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 74 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 79 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 73 mm
• oil filter cap, 12.5 mm (1/2") drive | 14-point Ø 74 mm
• oil filter cap, 12.5 mm (1/2") drive | 18-point Ø 84 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 89 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 91 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 90 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 95 mm
• oil filter cap, 12.5 mm (1/2") drive | 12-point Ø 76 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 80 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 101 mm
• oil filter cap, 12.5 mm (1/2") drive | 15-point Ø 92 mm

Technical data:

Material: Die-cast aluminium
Gross weight: 4050 g
Drive profile size, metric: 12,5 mm
Drive profile: Internal square
Drive profile size, inch: 1/2 "

• suitable for the assembly of bearing shells, sealing rings and rubber bands
• particularly helpful when used with hydraulic presses
• includes pressure washers with Ø 18 - 65 mm (1 mm steps) and Ø 74 mm
• 180 mm x Ø 12 mm metal handle, for use with hammer

Technical data:

Gross weight: 8130 g
Material: Carbon steel

• hydraulic
• mobile with 2 castors and carry handle

Technical data:

Rated load capacity: 2000 kg
Width: 202 mm
Gross weight: 9880 g
Max. lifting height: 340 mm
Height: 131 mm
Lifting height min.: 140 mm
Length: 450 mm

• for easy and safe removal and replacement of silent blocks on the vehicle
• no removal necessary, minimises the workload
• contains spindle, spindle extension, shoulder nut spindle adaptor M10x1.25 made of S45C carbon steel
• spacer, pressure piece, centering ring made from aluminium alloy

Technical data:

Gross weight: 3306 g

• double insulated tip
• multiple applications

Technical data:

Packaging suitable for wall hanging: Yes
Measuring range DC: 6 - 24 V
Gross weight: 90 g

• double insulated tip
• multiple applications
• DC: 6 - 12 - 24 - 110 - 220 - 380 V
• AC: 110 - 220 - 370 V

Technical data:

Measuring range AC: 110 - 370 V
Packaging suitable for wall hanging: Yes
Gross weight: 90 g
Measuring range DC: 6 - 380 V

• 120 - 250 V
• with lens and metal clip

Technical data:

Gross weight: 46 g
Packaging suitable for wall hanging: Yes

• for separating and riveting chains
• suitable for hollow rivet chain locks, for chain sizes with division 35 - 525
• 3 separating tips 2.2 - 2.9 - 3.8 mm included

Technical data:

Gross weight: 870 g

• for easy pressing out of drive shafts and for pulling out of brake drums
• 5 puller feet with oval mounting holes
• 2 pressure pieces, flat and pointed
• hardened puller spindle, Ø 18 x 185 mm, trapezoidal thread M18 x 3.0, strength class 8.8
• with sliding handle Ø 10 x 190 mm, 12.5 mm (1/2") drive and external hexagon 21 mm drive
• 2 discs for holding the puller feet, satin chrome plated Ø 62 and 100 mm
• suitable for 3-, 4-, 5- and 6-hole wheel hubs and brake drums with hole circle up to 200 mm

Technical data:

Surface finish: Satin chrome plated
Gross weight: 2634 g
Drive profile 1: Internal square
Drive profile 1, inch: 1/2 "
Drive profile size 1, metric: 12,5 mm
Drive profile 2: External hexagon
Material: Chrome Vanadium Steel

• suitable for brake callipers without adjuster, as in the case of front axle and rear axle brake systems, in which the handbrake does not act on the brake calliper
• opening: 0 - 66 mm
• 12.5 mm (1/2") drive and external hexagon 21

Technical data:

Gross weight: 854 g

• can be used as an internal or external extractor with 2 or 3 claws
• for disassembly of 4- and 5-hole wheel hubs and as pulling or impact hammer for body repair

scope of delivery:

• slide hammer: 2.3 kg
• 2 wheel hub adaptors
• 1 puller holder with 2 extension arms
• 1 puller holder with 3 extension arms
• 3 puller claws
• 1 locking pliers adaptor
• 1 dent adaptor

Technical data:

Gross weight: 7770 g
Material: Chrome Vanadium Steel

• forged and hardened carbon steel
• for assembly and disassembly of wheel nuts and with built in suspension strut

scope of delivery:

• 9 pressure pieces with external diameters of 55.5 - 59 - 62 - 65 - 66 - 71.5 - 73 - 78 - 84 mm
• pressure sleeves with counter plate (non-locking), inner diameter 75.5 - 82.9 mm
• pressure sleeve (open on both sides), inner diameter 69.9 mm
• 3 wheel hub puller screws M12 x 1.5
• 3 wheel hub puller screws M14 x 1.5
• ball bearing spindle, hexagon 32, Ø 22 x 280 mm

Technical data:

Gross weight: 8430 g
Material: Carbon Steel

• for disassembling and assembling valve springs
• allows changing of the valve stem seals without removing the cylinder head
• pressure hose for filling compressed air into the cylinder
• suitable for M14 and M18 ignition plug threads
• including valve collet mounting tool

Technical data:

Gross weight: 5246 g

• for checking components of the vacuum system, e. g. MAP sensors, valves, hoses, etc.
• also suitable for bleeding brake and clutch systems
• incl. connecting hoses, bleeding containers, hose connectors/adaptors, metal hook
• max. negative pressure 0.7 bar

Technical data:

Gross weight: 640 g
Packaging suitable for wall hanging: Yes

• for synchronising 2-, 3- and 4-carburetor systems
• suitable cars and motorcycles

scope of delivery:

• 4 pressure gauges Ø 92.5 mm, fitted on the plate
• 4 rubber hoses 8 x 5 x 750 mm
• 4 hose clamp replacement gaskets
• 4 connectors 53 mm (M6 x 0.75)
• 4 connectors 60 mm (M6 x 1.00)
• 4 extensions 3.9 x 102 mm
• 4 extensions 3.9 x 170 mm
• negative pressure measuring range: 0 to -70 cm Hg (0 to -30 In Hg)
• pressure measuring range: 0 to 14 PSI (0 to 1 kg/cm²)

Technical data:

Gross weight: 3158 g

• for bonded windscreens

scope of delivery:

• panel release tool with handle 275 mm
• piercing awl 350 mm
• 2 handles for cutting wire
• cutting wire 1.8 m
• double hook handle 240 mm
• pull blade with handle and pull rope

Technical data:

Packaging suitable for wall hanging: Yes
Gross weight: 1160 g