Gearbox / Axle / Steering

• incl. exchangeable socket 17 x 19 mm
• rubber coated handle
• length: 330 - 500 mm

Technical data:

• heavy duty version with 152 mm pressure fork opening
• the set includes all the necessary sleeves and pressure pieces for changing the ball joints on most US vehicles, e. g. GM, Ford and Dodge 2WD and 4WD pick-ups up to 1997
• can also be used on many European SUV cars and vans

scope of delivery:

• pressure spindle, 230 mm
• pressure spindle arm
• pressure bolt for pressure spindle, length 6.4 / 19 mm
• collection sleeve 44.5 x 50.8 mm
• collection sleeve 57.2 x 63.5 mm
• collection sleeve 69.9 x 76.2 mm
• holding sleeve 57.2 mm
• holding sleeve 44.5 mm
• holding sleeve 36.5 mm
• holding sleeve 69.9 mm
• adaptor for reception bushes 50.8 mm
• receptacle cup 50.8 mm
• receptacle cup 66.7 mm
• receptacle cup 31.8 mm
• receptacle cup 44.5 mm
• assembly cup 44.5 mm

Technical data:

Technical data:

• for easy and quick removal of tie rods and carrier joints
• narrow profile, suitable for most vehicles
• three pull-out feet sizes for use on most passenger cars, and light industrial vehicles

scope of delivery:

• puller foot, opening 23 mm, puller width 55 mm
• puller foot, opening 28 mm, puller width 55 mm
• puller foot, opening 34 mm, puller width 63 mm

Technical data:

• suitable for wheel bearing tool set BGS 67300

Technical data:

• suitable for wheel bearing tool set BGS 67300

Technical data:

• universal type for all car models
• also for assembly or disassembly of silent, bearings rubber- and ball bearings
• also suitable for rubber bushes and rotary shaft seals
• smooth running because of deep grooved ball bearing on spindle nut
• pressure pads are slotted for visual inspection

scope of delivery:

• spindle, M10, 350 mm
• spindle, M12, 350 mm
• spindle M14, 350 mm
• spindle M16, 350 mm
• pressure piece outside Ø 44 mm x inside Ø 34 mm
• pressure piece outside Ø 46 mm x inside Ø 36 mm
• pressure piece outside Ø 48 mm x inside Ø 38 mm
• pressure piece outside Ø 50 mm x inside Ø 40 mm
• pressure piece outside Ø 52 mm x inside Ø 42 mm
• pressure piece outside Ø 54 mm x inside Ø 44 mm
• pressure piece outside Ø 56 mm x inside Ø 46 mm
• pressure piece outside Ø 58 mm x inside Ø 48 mm
• pressure piece outside Ø 60 mm x inside Ø 50 mm
• pressure piece outside Ø 62 mm x inside Ø 52 mm
• pressure piece outside Ø 64 mm x inside Ø 54 mm
• pressure piece outside Ø 66 mm x inside Ø 56 mm
• pressure piece outside Ø 68 mm x inside Ø 58 mm
• pressure piece outside Ø 70 mm x inside Ø 60 mm
• pressure piece outside Ø 72 mm x inside Ø 62 mm
• pressure piece outside Ø 74 mm x inside Ø 64 mm
• pressure piece outside Ø 76 mm x inside Ø 66 mm
• pressure piece outside Ø 78 mm x inside Ø 68 mm
• pressure piece outside Ø 80 mm x inside Ø 70 mm
• pressure piece outside Ø 82 mm x inside Ø 72 mm

Technical data:

• forged and hardened carbon steel
• for assembly and disassembly of wheel nuts and with built in suspension strut

scope of delivery:

• 9 pressure pieces with external diameters of 55.5 - 59 - 62 - 65 - 66 - 71.5 - 73 - 78 - 84 mm
• pressure sleeves with counter plate (non-locking), inner diameter 75.5 - 82.9 mm
• pressure sleeve (open on both sides), inner diameter 69.9 mm
• 3 wheel hub puller screws M12 x 1.5
• 3 wheel hub puller screws M14 x 1.5
• ball bearing spindle, hexagon 32, Ø 22 x 280 mm

Technical data:

• for easy pressing out of drive shafts and for pulling out of brake drums
• 5 puller feet with oval mounting holes
• 2 pressure pieces, flat and pointed
• hardened puller spindle, Ø 18 x 185 mm, trapezoidal thread M18 x 3.0, strength class 8.8
• with sliding handle Ø 10 x 190 mm, 12.5 mm (1/2") drive and external hexagon 21 mm drive
• 2 discs for holding the puller feet, satin chrome plated Ø 62 and 100 mm
• suitable for 3-, 4-, 5- and 6-hole wheel hubs and brake drums with hole circle up to 200 mm

Technical data:

• can be used as an internal or external extractor with 2 or 3 claws
• for disassembly of 4- and 5-hole wheel hubs and as pulling or impact hammer for body repair

scope of delivery:

• slide hammer: 2.3 kg
• 2 wheel hub adaptors
• 1 puller holder with 2 extension arms
• 1 puller holder with 3 extension arms
• 3 puller claws
• 1 locking pliers adaptor
• 1 dent adaptor

Technical data:

Technical data:

Technical data:

Technical data:

Technical data:

Technical data:

• for easy and safe removal and replacement of silent blocks on the vehicle
• no removal necessary, minimises the workload
• contains spindle, spindle extension, shoulder nut spindle adaptor M10x1.25 made of S45C carbon steel
• spacer, pressure piece, centering ring made from aluminium alloy

Technical data:

• suitable for the assembly of bearing shells, sealing rings and rubber bands
• particularly helpful when used with hydraulic presses
• includes pressure washers with Ø 18 - 65 mm (1 mm steps) and Ø 74 mm
• 180 mm x Ø 12 mm metal handle, for use with hammer

Technical data: