Engine / Oil Pressure

• for checking pressure tightness of single cylinders on diesel and gasoline engines
• includes dial indicator
• adaptor M12 x 1.25 mm for motorbikes
• adaptor M10 x 1.00 mm for motorbikes
• adaptor M24 x 2 mm for diesel engines
• adaptor M12 x 1.25 mm with 7 mm hole for VW diesel engines
• adaptor for multi valve engines
• adaptor for M14 x 1.25 and M18 x 1.5 mm
• working pressure: 6 - 12 bar

Application note: Before connecting to compressed air system the adjusting valve must be closed. Connect the device to the compressed air system and open the adjusting valve slowly until the pointer reaches the 0-mark!

Technical data:

• for pressure loss and compression measurements on diesel and gasoline engines
• includes adapters for glow plug and spark plug threads

suitable for the following models:

• Alfa Romeo, Audi, BMW, Chrysler, Citroën, Daewoo, Fiat, Ford, Honda, Hyundai, Isuzu, Jeep, Kia, Lada, Lancia, Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Range Rover, Renault, Rover, Saab, Seat, Skoda, Suzuki, Toyota, Vauxhall, Volvo, VW
• dial gauge for pressure loss and compression measurements are required
• the following sets or dial gauges are suitable:
  • Compression Tester Set for Petrol and Diesel engines (BGS 8400)
  • Compression and Pressure Loss Tester Set for Petrol and Diesel engines (BGS 8401)
  • Compression Tester Set for Diesel engines (BGS 8008)

scope of delivery:

• adapter for glow plug thread M10 x 1.25 | a=11 | b=8 mm
• adapter for glow plug thread M12 x 1.25 | a=12 | b=8 mm
• adapter for glow plug thread M12 x 1.25 | a=11 | b=47 mm
• adapter for glow plug thread M10 x 1.25 | a=22.5 b=23.5 mm
• adapter for glow plug thread M10 x 1.25 | a=18.5 | b=10.5 mm
• adapter for glow plug thread M10 x 1.25 | a=28 | b=16 mm
• adapter for glow plug thread M10 x 1.25 | a=23 | b=9.5 mm
• adapter for glow plug thread M10 x 1.25 | a=28 | b=55 | c=3 mm
• adapter for glow plug thread M10 x 1.25 | a=26 | b=59 mm
• adapter for glow plug thread M10 x 1.25 | a=29 | b=73 mm
• adapter for glow plug thread M10 x 1.25 | a=15 | b=27 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=23 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=31 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=14 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=59 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=47 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=42 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=64 | c=5 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=57 | c=5 mm
• adapter for glow plug thread M8 x 1.0 | a=18 | b=52 mm
• clamp adaptor without thread
• adapter for spark plug thread M10 x 1.0
• adapter for spark plug thread M12 x 1.25
• adapter for spark plug thread M18 x 1.5
• test hose for spark plug adapter
• angle piece with quick coupler
• valve turning tool to change the adapter valves
• replacement O-ring and valves

Technical data:

• suitable for 2- and 4-stroke motorcycle engine
• M14 x 1.25 female thread
• to use with BGS 8005, 8235 or 8236

Technical data:

• suitable for 2- and 4-stroke motorcycle engine
• M14 x 1.25 female thread
• to use with BGS 8005, 8235, 8236

Technical data:

• helps to locate faults in the oil pump system
• scale measuring 0 – 10 bar (tolerace +-5%)

with many adaptors:

• R 1/8" DIN 2999 - 1/8"x27 NPT - 1/4"x18 NPT - 3/8"x20 UNF - 1/2"x20 UNF
• M10x1.0 - M12x1.5 - M14x1.5 - M16x1.5 - M18x1.5 - 90°

Technical data:

• included various adaptors (for glowplugs and injector nozzles) make this kit useful for many car types
• suitable for nearly all brands, such as: BMW, Mercedes-Benz, Ford, VW, Toyota, Renault, Volvo, Mazda, PSA, Opel, Nissan, Vauxhall

scope of delivery:

• 1 manometer 0 - 70 bar, accuracy +/- 5%
• 1 angled adaptor
• 5 glow plug adaptors:
  • M10 x 1.25 mm, 114.5 mm long
  • M10 x 1.0 mm, 119 mm long
  • M10 x 1.25 mm, 73.5 mm long
  • M12 x 1.25 mm, 54 mm long
  • M14 x 1.25 mm, 72 mm long
• 3 injector adaptors:
  • M20 x 1.5 mm, 78 mm long
  • M24 x 2.0 mm, 65 mm long
  • Ø 21 mm, 114 mm long
• 1 stanadyn injector adaptor: Ø 19 mm, 112 mm long

Technical data:

• suitable for BGS 8008

Technical data:

• actuation hexagon 10 mm

Technical data:

• for compression tester for diesel engines BGS 8008

Technical data:

• for professional diagnosis of automatic gear mechanism
• long test hoses allow test from the driver’s seat

suitable for the following automatic gears:

• VW, Mercedes-Benz, Honda, Hyundai, almost all series
• Audi, VW 003, VW 010, VW 097, almost all ZF gears
• BMW Borg Warner 65, almost all ZF gears
• Chrysler A-Series rear-wheel drive, 32, 36, 42, 44, 46 RH + RE, A-series rear, 42LE, KM series, F3A
• AMC / Eagle A604/41, 42LE, KM series, W4A32-1 ZF gears (Eagle Premier), MB-1, AR4, MJS (Renault), AW-4
• Jeep A904, A999, A500, A518, A727, 30, 32RH Turbo HyDRY-Matic TH400
• Ford A4LD, AOD, AXOD, ATX, C3, C4, C5, C6, AODE, E40D, 4R70W, 5R55E, AOT, Mazda gears 4EAT
• GM Turbo Hydra-Matic, AL60E, 4L80E, AT60E Aisin Warner MX-1 + MS-7, JATCO KF-100
• Isuzu Borg-Warner BW-35, AISIN Warner BW-35 JATCO F3A/F10, Hydra-Matic TH4L30E, 4L60E
• Jaguar ZF gears, Borg-Warner 65, Hydra-Matic
• Mitsubishi AISIN Warner, KM series, JATCO, torque Lite
• Peugeot ZF gears, Mazda JATCO, Ford A4LD
• Porsche 010 VW, ZF gears
• Saab Borg-Warner 37, ZF gears
• Toyota AISIN Warner A-20 + A-30, almost all models
• Volvo AISIN Warner, Borg Warner, ZF gears

scope of delivery:

• high-pressure pressure gauge 0 - 500 PSI (0 - 35 bar), diameter 60 mm, hose length: 350 cm
• pressure gauge 0 - 100 PSI (0 - 7 bar) diameter 60 mm, tube length 200 cm
• 230 mm hose adaptor 1/8-27 to 1/4", quick coupling
• Adaptor:
  • 1/8-27 - M10x1.0
  • 1/8-27 - 1/16-27 NPT
  • 1/8-27 - 5/16-24 NF
  • 1/8-27 - M8x1.25
  • 1/8-27 - M8x1.0
  • 1/8-27 VW Audi
  • 1/8-27 - 1/8-28 BSPT
• adaptor internal thread 1/8-27 - external screw thread 1/4-18 NPT
• elbow: 1/8-27 - 90° + 1/8-27 - 45°
• adaptor 1/8-27, length: 50 mm

Technical data:

• suitable for motorcycles and cars with M12 mm or M14 mm spark plug
• 300 mm long, flexible test hose
• large (Ø 70 mm) easy to read scale - accuracy: +/- 3%
• gauge range: from 0 to 21 bar / 21.5 kg/cm² / 300 PSI
• blow off valve
• to probe engine valve and piston rings
• Application note: Shut down power of ignition coil before working with this tool!

Technical data:

• suitable for engines with up to 6 cylinders
• for using in combination with a feeler gauge
• tolerance: < 0.05 mm

Technical data:

• compression pressure testing up to 50 bar (725 psi) possible
• quick coupling in straight or angled version

scope of delivery:

• glow plug adaptors for the following brands: Alfa, BMW, Chrysler, Daewoo, Fiat, Ford, Hyundai, Isuzu, Land Rover, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Opel, PSA, Renault, Saab, Suzuki, Toyota, VAG, Vauxhall and Volvo
• injector adaptors M20, M22, M24 and Stanadyne injectors for Ford
• spark plug adaptors M10, M12, M14 and M18
• suitable for most cars, trucks, buses, agricultural and marine engines

Technical data:

• suitable for most petrol and modern HDi, TDCi, pump injector and older diesel engines
• compression pressure testing up to 50 bar (725 psi) possible
• quick coupling in straight or angled version
• all gauges with rubber protection

scope of delivery:

• glow plug adaptors for the following brands: Alfa, BMW, Chrysler, Daewoo, Fiat, Ford, Hyundai, Izusu, Land Rover, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Opel, PSA, Renault, Saab, Suzuki, Toyota, VAG, Vauxhall and Volvo
• injector adaptors M20, M22, M24 and Stanadyne injectors for Ford
• spark plug adaptors M10, M12, M14 and M18
• suitable for most cars, trucks, buses, agricultural and marine engines
• additional pressure gauge for pressure drop test

Technical data:

• for compression measurement with hose adaptor or rubber-cone measuring tube
• spark plug thread adaptor: M10x1.0 - M12x1.25 - M14x1.25 - M18x1.5
• 63 mm gauge with LCD-display
• switchable units (psi, bar, kpa)
• pressure memory for up to 12 cyl.
• pressure range 0.1 - 20.6 bar (2.0 – 299.5 psi)
• resolution: 0.05 bar, 0.5 psi, 5 kpa
• automatic zero pressure calibration
• switchable backlight
• automatic off function, saves battery

Technical data:

• for checking mechanical fuel pumps, fuel lines and for leakage test on throttle valves, intake manifolds, vacuum hoses, etc.
• pressure / vacuum gauge with rubber bumpers and hanging hook, Ø 89 mm
• includes flexible hose and adaptor
• vacuum measuring range: 0 - 25 in HG (0 - 70 cm HG)
• pressure measuring range: 0 - 0.7 kg/cm² (0 - 10 psig)

Technical data:

• for testing of the exhaust back pressure
• to be connected to oxygen sensor thread of the exhaust system or to flange of exhaust gas recirculation valve
• allows conclusions on blockages or constrictions, such as e.g. clogged catalysts or particulate filters, thereby preventing expensive repair costs due to damage to the turbocharger

scope of delivery:

• 1 adaptor for oxygen sensor thread M12x1.25
• 1 adaptor for oxygen sensor thread M18x1.5
• 1 flange adaptor for exhaust gas recirculation valve (EGR)
• 1 pressure gauge, 57 mm with two ranges in psi & kg/cm²
• 1 braided stainless steel casing hose, length 1.9 m

Technical data:

• for compression measurements with hose adaptor or rubber-cone measuring tube
• spark plug thread adaptor:
  • M10x1.0 - M12x1.25 - M14x1.25 - M18x1.5
• analogous pressure gauge
• pressure gauge scale: 0 - 300 psi / 0 - 2000 kpa (0-20 bar)
• with pressure release valve

scope of delivery:

• pressure gauge with quick coupling & pressure release valve
• connecting hose with quick coupler
• compression test pipe, angled type
• compression test pipe, straight type
• spark plug thread adapter M18 x 1.5
• spark plug thread adapter M14 x 1.25
• spark plug thread adapter M12 x 1.25
• spark plug thread adapter M10 x 1.0

Technical data: