Main page » Tools » BGS » Workshop Tools » Test Devices » Battery

Battery

Round Battery Terminal Set

round cable holder with 2 clamping screws
includes 1 plus and 1negative pole terminal

Technical data:

Gross weight: 140 g
Material: Solid brass
Packaging suitable for wall hanging: Yes

RRP 9,56 EUR
Only 3,39 EUR

incl. 19% tax excl. Shipping costs

Car Battery Disconnect Adaptor

for disconnecting the battery when not used for a prolonged period, can also be used to prevent theft of a car
electrical isulation of the negative battery pole
suitable for batteries with round terminals
max. current: 250 A

Technical data:

Packaging suitable for wall hanging: Yes
Gross weight: 140 g

RRP 10,70 EUR
Only 5,19 EUR

incl. 19% tax excl. Shipping costs

Car Battery Disconnect Adaptor | angled

for disconnecting the battery when not used for a prolonged time period, can also by used to prevent theft of a car
electrical isulation of the negative battery pole
suitable for batteries with round terminals
max. current: 250 A

Technical data:

Gross weight: 130 g
Packaging suitable for wall hanging: Yes

RRP 13,98 EUR
Only 5,50 EUR

incl. 19% tax excl. Shipping costs

Car Battery Disconnect Adaptor | flat

Otros - for disconnecting the battery when not used for a prolonged time period - can also by used to prevent theft of a car
suitable for batteries with flat terminals
max. current: 250 A

Technical data:

Packaging suitable for wall hanging: Yes
Gross weight: 170 g

RRP 13,98 EUR
Only 5,50 EUR

incl. 19% tax excl. Shipping costs

Digital Battery Tester and Charger System Tester | with Printer

suitable for 6 & 12 volt batteries (lead acid, gel, wet cell, MF, VRLA, AGM and deep cycle batteries)
menu-driven, intuitive operation
automatic control of the entire test procedure through menu navigation
for the quick and simple determination of battery efficiency while taking the temperature
compensation into account
to be connected to the battery via two plastic-coated crocodile pole clamps
allows professional tests of:
- 6 & 12 volt batteries incl. battery internal resistance measurement (tolerance: 5%)
- 12 & 24 volt starting systems
- 12 & 24 volt charging systems
voltage range: 1.5 - 30 volts (tolerance: 0.1 V)
multi-standard test: SAE, DIN, EN, IEC, CA, JIS
work area SAE: 40 - 2000 CCA
work area IEC: 30 - 1500 CCA
work area EN: 40 - 2100 CCA
work area DIN: 25 - 1500 CCA
work area CCA: 240 - 1440 CCA
thermal printer to print out the test results
display type: 66 x 33 mm LCD
battery type: 6 x 1.5 V AA
languages: English, French, German, Espanol, Portugues

scope of delivery:

battery-, charging- and starting system analyzer
2 rolls of printer paper, width: 58 mm, length: 10 m
6 batteries, type 1.5V AA

Technical data:

Gross weight: 1578 g
Operating temperature: 0 - 50 °C

RRP 303,13 EUR
Only 176,19 EUR

incl. 19% tax excl. Shipping costs

Battery and charger system tester

for fault diagnosis of 12-V battery and charging systems
easy to use, just connect and check indicator lights
LEDs are electronically controlled
3 LEDs for battery test: LED red = battery empty or defective / LED yellow = battery OK / LED green = battery very good
3 more LEDs for alternator test: LED green = charging system OK / LED yellow = charging system OK (maximum charging voltage) / LED red = charging system is not OK (it may damage the battery and other parts of the electric system)

Technical data:

Packaging suitable for wall hanging: Yes
Gross weight: 110 g

RRP 15,41 EUR
Only 8,29 EUR

incl. 19% tax excl. Shipping costs

Spare Paper Rolls for Printer | 2 pcs.

suitable for battery/charging system analyser BGS 2196

Technical data:

Gross weight: 20 g

RRP 19,12 EUR
Only 9,29 EUR

incl. 19% tax excl. Shipping costs

Digital Battery Load Tester

for testing vehicle batteries, charger and starter systems
suitable for 12-V batteries with cold start current from 200 to 1000 A
3-digit digital voltage display
battery condition is shown via 3 LEDs
load current:125 A
weight: 480 mm

Technical data:

Height: 90 mm
Width: 170 mm
Length: 290 mm
Gross weight: 1380 g

RRP 89,42 EUR
Only 44,20 EUR

incl. 19% tax excl. Shipping costs

Digital Battery Load Tester | 1.5V / 9V

Gross weight: 68 g$Packaging suitable for wall hanging: Yes

RRP 14,21 EUR
Only 6,30 EUR

incl. 19% tax excl. Shipping costs

Battery Plug Turning Tool | with T-Handle

for damage-free loosening and tightening the plastic plug on the starter battery
special slot profile for battery plug
universally applicable due to its low height
thus allows the use in hard to reach areas
also suitable for vent and drain screws on plastic coolers on BMW, Ford, etc.

Technical data:

Length: 94 mm
Gross weight: 90 g
Output profile: Slot SL
Material: Carbon Steel
Output profile size: 14 x 1,7
Packaging suitable for wall hanging: Yes

RRP 17,84 EUR
Only 8,29 EUR

incl. 19% tax excl. Shipping costs

Emergency Battery Switch | 300 A

for separating the battery from the electrical system
is used in motor sports, construction machines etc.
prevents battery drain
2 mounting holes
protective cap prevent entry of moisture
incl. 2 keys with hole for operating cable

Technical data:

Gross weight: 120 g

RRP 23,99 EUR
Only 11,70 EUR

incl. 19% tax excl. Shipping costs

Antifreeze Tester Hydrotemp

robust and break-proof type
for checking the radiator antifreeze quality
usable for antifreeze/water mixture based on ethylene-glycol-(ethandiol)
display accuracy: 0.5°C
suction bulb made of elastomer is flexible at all times and guarentees function in all temperature ranges
hydrostatic block prevents automatic discharge and retightening of air the display
display is immediately stable
non-drip suction tube
all temperature twin measuring element, swivable 360º
for direct reading
measuring scale in Celsius
measuring range 0 up to -40°C