Leverss / Cross Beams / Cranes

• heavy duty crane for daily garage use
• suitable as a engine crane, for aligning components and machines or for lifting and holding loads in everyday workshop routine
• foldable for easy transport and space-saving storage
• with hand lever pump
• easy lifting and lowering by hydraulic cylinder
• easy to move in connection with 4 castors and 2 heavy duty swivel castors
• load carrier on the boom with stable chain and safety load hook
• telescopic crane boom with 4-way adjustment options

• adjustable lifting arm length in following 4 positions:
  • crane arm position 1: 900 mm, max. load 1000 kg
  • crane arm position 2: 990 mm, max. load 750 kg
  • crane arm position 3: 1080 mm, max. load 500 kg
  • crane arm position 4: 1170 mm, max. load 250 kg

• rated load: max. 1000 kg
• lifting range: 160 - 2040 mm
• crane arm length: max. 1170 mm
• stroke (max. rated load): 1860 mm
• height (max. rated load): 415 mm
• opening width of hook: 18 mm
• front wheel dimensions: Ø 89 x 30 mm
• middle wheel dimensions: Ø 76 x 30 mm
• rear wheel dimensions: Ø 76 x 30 mm
• over all dimension (lowest position): 1515 x 1050 x 1445 mm

Technical data:

• suitable Screw-Set for BGS 11999

Technical data:

• for assembling and disassembling engines, gearboxes and rear axles
• heavy duty version
• for uncomplicated lifting by using a hydraulic hand pump
• stepless regulation and precise positioning
• extra deep working area
• loads can be lowered in a controlled manner
• with safety valve
• head plate angle and inclination adjustable by using knurled screws
• including wide retaining rails (400 mm) with retaining chains (790 mm) for securing the transmission / gearbox
• the distance between the holding rails can be adjusted individually from 235 to 335 mm
• good maneuverability with 4 oil and acid-proof metal castors
• 2 fixed castors Ø 88.5 mm
• 2 swivel castors Ø 75 mm
• dimensions of head plate: 340 x 200 mm
• lifting capacity max.: 500 Kg
• lifting height min.: 160 mm
• lifting height max.: 650 mm
• net weight: 37 Kg
• material: steel

Technical data:

• suitable Screw Set for BGS 70183

Technical data:

• secure support of engine or gearbox during assembly
• is required for e.g. disassembly of the engine mount, timing belt and replacement of clutch
• sturdy square tube construction
• feets and support plate are height adjustable and lockable
• rotatable retaining hooks, adjustable in height by hand wheel
• slidable and fixable crosspiece and retaining hook
• support plate with non-slip rubber pad
• especially suitable for large fender angle, where a mounting of engine bridge is very difficult
• suitable for many common vehicles
• length of the longitudinal beam: 690 up to 1050 mm
• max. retaining hook distance: 500 mm
• crossbeam supporting foot distance: 450 mm

Technical data:

• rotates 360º and can be locked in 8 positions
• ball bearing castors
• 4 turnable plate allows easy moving of the engine - mounting points, adjustable

Technical data:

• for assembling and disassembling engines, gearboxes and rear axles
• adjustable head plate, 60 mm to the side and from -10° to 35° in inclination, therefore especially suitable for mounting of automatic transmissions
• height approx. 855 - 1760 mm
• 4 ball bearing caster wheels
• heavy duty construction
• fast lifting due to hydraulic foot pedal

Technical data:

• for assembling and disassembling of engine and gearbox
• strong square-type tube
• slot for flexible width adjustment
• hooks with threaded rods M20 x 2.5
• rubber pads protect fenders
• with two chains, each chain 900 mm long

Technical data:

• for disassembling and assembling of gearboxes, etc.
• sturdy construction from square steel tube
• very wide adjustment range in length and width
• rubberised support feet prevent slipping as well as damage to the surface
• maximum load capacity: 500 kg
• main beam width: 400 to 1,400 mm
• cross beam width: 140 to 810 mm
• incl. 2 spindles with hook

Technical data: