Wheel BeaRing & Rubber Bushes

• universal type for all car models
• also for assembly or disassembly of silent bearings, rubber- and ball bearings
• also suitable for rubber bushes and rotary shaft seals
• smooth running because of high-quality ball bearing on spindle screw nut

scope of delivery:

• four 350 mm spindles in M10, M12, M14 und M16
• 20 pressure pads (outer Ø x inner Ø): 44x34 - 46x36 - 48x38 - 50x40 - 52x42 - 54x44 - 56x46 - 58x48 - 60x50 - 62x52 - 64x54 - 66x56 - 68x58 - 70x60 - 72x62 - 74x64 - 76x66 - 78x68 - 80x70 - 82x72

Technical data:

• suitable for BGS 1514
• incl. bearing and pressure nut

Technical data:

• for flush fitting and centering bearing rings and tapered roller bearings
• incl. one pin and pressure piecea with the following external diameters: 40 - 44 - 50 - 59 - 63 - 65 - 72 - 76 - 81 mm
• reception 14 mm

Technical data:

• made from aluminium

scope of delivery:

• 3 drift pins: Ø 11 - 16 - 21 mm
• 13 pressure pieces:
  • 10 mm internal diameter x 12 mm external diameter
  • 12 mm internal diameter x 14 mm external diameter
  • 14 mm internal diameter x 16 mm external diameter
  • 15 mm internal diameter x 17 mm external diameter
  • 16 mm internal diameter x 18 mm external diameter
  • 18 mm internal diameter x 20 mm external diameter
  • 19 mm internal diameter x 21 mm external diameter
  • 20 mm internal diameter x 22 mm external diameter
  • 22 mm internal diameter x 24 mm external diameter
  • 25 mm internal diameter x 27 mm external diameter
  • 26 mm internal diameter x 28 mm external diameter
  • 28 mm internal diameter x 30 mm external diameter
  • 30 mm internal diameter x 32 mm external diameter

Technical data:

• M18 spindle suitable for impact wrench use
• can be used with hydraulic ram BGS 7721-X
• max. pressing width: 220 mm
• frame dimensions: 340 x 185 mm
• distance from spindle to frame: 80 mm
• suitable for use with pull and pressure sleeve sets BGS 1514

Technical data:

• suitable for the following VAG models: Audi A2, VW Lupo / Polo / Fox, Seat Ibiza, Skoda Fabia
• fIts on 62, 66 and 72 mm bearing unit
• allows mounting directly on the vehicle
• reduces operating time to the minimum
• simple and safe handling
• can also be optionally used with a workshop press

scope of delivery:

• 1 universal pressure bell
• 3 pressure pieces
• 1 spindle unit with ball bearing M20
• 2 half shells (black) for 72 mm bearing
• 2 half shells coupling (chrome plated), for 66 mm bearing
• 2 half shells coupling (anodized), for 62 mm bearing
• fastening screws for half shells M12 x 1.5
• fastening screws for half shells M14 x 1.6

Technical data:

• suitable for BGS 6250

Technical data:

• for removing and installing the rear and front bushes of front axle control arm

suitable for:

• VW T5 (2005-2011)

• original rubber bushes with original part no. OE 7H0407183 and 7H0407182

scope of delivery:

• 1 removing body, Ø 70 mm, length 76 mm
• 1 removing plate, Ø 59.5 mm, length 24 mm
• 1 installing plate, Ø 69.5 mm, length 24 mm
• 1 installing body, Ø 73 mm, length 27 mm
• 1 installing body, Ø 57 mm, length 25 mm
• 1 installing plate, Ø 53 mm, length 18 mm
• 1 removing plate, Ø 57 mm, length 23 mm
• 1 bearing, Ø 30 mm
• 1 adaptor nut, M14 x 2.0, length 50 mm, external hexagon drive 24 mm
• 2 nuts, M14 x 2.0
• 1 nut, M14 x 3.0
• 1 threaded rod, M14 x 3.0, length 212 mm, external hexagon drive 21 mm
• 1 threaded rod, M14 x 2.0, length 265 mm, external hexagon drive 10 mm

Technical data:

• for removing / installing the rear wheel bearing and rear axle flange on Mercedes-Benz types W124, 129 201, 202

Technical data:

• for differential suspension bushes at rear axle

scope of delivery:

• spindle M14 x 2 (long), M12 x 1.75 (short), length: 300 mm
• 10 mm drive
• nut 22 mm drive
• bell, inner Ø: 60, 70 mm, outer Ø: 80 mm, length: 70 mm
• spindle pressure washer, outer Ø: 67 mm, thickness: 25 mm
• thrust washer, inner Ø: 27 mm, outer Ø: 70 mm, thickness: 16 mm
• spindle pressure washer, outer Ø: 48 mm, thickness: 16 mm
• axial deep groove ball bearing, outer Ø: 42 mm
• profile disc, inner Ø: 50 mm, outer Ø: 80 mm

Technical data:

• universal use on wheel bearings
• allows disassembly and assembly of the wheel hub and the wheel bearings directly on the vehicle
• gentle installation by exerting pressure on the outer bearing ring
• suitable for axle tubes and axles with bearing adjacent to a bund

scope of delivery:

• pressure plates with diameters of: 50 - 55 - 59 - 63.3 - 66.6 - 70.3 - 71.5 - 73.1 - 73.4 - 74.8 - 77.5 - 81.5 - 83.4 mm
• sleeves with following diameters: 76 - 86 - 91 - 102 mm
• 3 extractor bolts M12 x 1.5
• 1 extractor bolt M14 x 1.5
• spindle 22.2 mm x 300 mm, including thrust bearing (protects against increased friction)
• external hexagon drive 38
• pressure nut 32 x 60 mm
• pressure sleeve Ø 38 x 40 mm
• pressure disk Ø 40 x 3 mm

Technical data:

• suitable for BGS 67301

Technical data:

• comprehensive kit for fast and effective removal and installation of wheel bearings & suspension bushes
• reduces the possibility of damaging the bearing and housings
• plates and sleeves can also be used in a common workshop press

scope of delivery:

• supplied with 4 stepped end plates
• pressure plates: Ø 83 x 20 mm
• 4 screws: M10 x 1.5 - M12 x 1.5 - M14 x 1.5 M16 x 1.5 mm, 450 mm long
• pressure sleeves with outer-Ø 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82 mm
• sleeve wall thickness: 5 mm
• sleeve height: 94 mm

Technical data:

Technical data:

Technical data:

• for assembling and disassembing of the rear trailing arm bushes

suitable for following vehicles:

• Ford Mondeo (2007 - ), S-Max (2006 - ), Galaxy (2006 - )
• Volvo S60, S80, XC60, V70, XC70 (2006 - ) based on the Ford platform

Technical data:

• for replacing the rear trailing arm bush
• legs with hook for mounting the tool securely on trailing arm
• adjustable hook legs allow to adjust the leg distance
• no damage to ABS sensor cable, trailing arm or parts close to bush
• service is completely carried out without removing the trailing arm from the car

suitable for the following models:

• Honda Civic (1988-2000), Del-Sol (1993-1997), CRV (1997-2002) and Acura Integra (1994-2001)

Technical data:

• for removing and installing of rubber bushings on rear axles

suitable for following vehicle models:

• Toyota Avensis (M2)
• Toyota Corolla
• Toyota Corolla Verso (E12)
• Toyota Previa (R3)
• Toyota Yaris (P10, P13)
• Toyota Yaris Verso (P20, P21, P22)
• Toyota Camry, Picnic (XM1)

fits on rubber bushings with the following original spare part numbers:

• 48725-28050, 28725-44050, 28725-44050, 48725-02220, 48725-12580, 48725-0F010, 48725-47010, 48725-52010, 48725-52020, 48725-0D011, 48725-0D050

scope of delivery:

• 1 disassembly tool, half round open, with spindle, Ø 92 x 122 mm height
• 1 disassembly pressure piece with spindle (for medium-sized bushings), M12 x 1.5
• 1 disassembly pressure piece with spindle (for small bushings), M12 x 1.5
• 1 disassembly pressure piece with spindle (for large bushings), M14 x 2.0
• 1 ball bearing, Ø 57 x 23 mm height
• 1 assembly pressure plate for medium and large-sized bushings, Ø 84 x 24 mm height
• 1 assembly pressure piece for medium and large-sized bushings, Ø 9.5 x 52 mm height
• 1 pulling spindle, M12 x 1.75
• 2 pulling spindle nut, M12 x 1.75
• 1 pulling spindle, M14 x 2.0
• 2 pulling spindle nut, M14 x 2.0
• 1 reduction shell for for small bushings
• 1 assembly pressure plate for small bushings
• 1 assembly pressure piece for small bushings
• 1 C-bracket
• 2 C-bracket bolts, M16 x 24
• 2 holding clamps for medium and large-sized bushings
• 2 holding clamps for small bushings

Technical data:

• for disassembly and assembly of the silent bearings in the trailing arm of the rear axle
• high time saving, no disassembly of the rear axle necessary

suitable for:

• Ford Mondeo (2007-)
• Ford Mondeo Turnier (2000-2007)
• Ford S-Max (2006-)
• Ford Galaxy (2006-)

also suitable for Volvo models on platform of Ford models:

• Volvo S60 (2006-)
• Volvo S80 (2006-)
• Volvo XC60 (2006-)
• Volvo V70 (2006-)
• Volvo XC70 (2006-)

Technical data:

• for easy removal and installation of retaining rings on wheel bearings
• specially shaped lever end for hooking into the retaining ring end
• suitable for the following vehicle manufacturers:
  • Vauxhall
  • Ford
  • PSA
  • Fiat
• ideal for use on Vauxhall Adam and Ford Kuga
• also suitable for the circlip on Ford DCT clutch packs

Technical data:

• for disassembly and assembly of the differential rubber bushing in the rear axle carrier

suitable for the following vehicle models:

• BMW 5, 6, 7 (F01, F02, F04, F06, F07, F10-F13, F18)

• suitable for rubber bushing with original spare part number OE 33 316 792 872
• to be used like OEM 330 020

scope of delivery:

• 1 disassembly sleeve
• 1 disassembly plate
• 2 mounting plates
• 1 spindle
• 1 spindle nut

Technical data:

• for disassembly and assembly of the two differential rubber bushings in the rear axle carrier
• suitable for bushings with OE number 33 316 792 873 and comparable bushings of other manufacturers

for the following vehicle models:

• 750i (F01) 4.4L V8, 750Li (F02) 4.4L V8, 535i GT (F07) 3.0L, 550i GT (F07) 4.4L V8
• 550i GT xDrive (F07) 4.4L V8, 750i xDrive (F01) 4.4L V8, 750Li xDrive (F02) 4.4L V8
• 760Li (F02) 6.0L V12, 528i (F10) 3.0L, 535i (F10) 3.0L, 535i GT xDrive (F07) 3.0L
• 535i xDrive (F10) 3.0L, 550i (F10) 4.4L V8, 550i xDrive (F10) 4.4L V8, 740i (F01) 3.0L
• 740Li (F02) 3.0L, 750i Active Hybrid (F04) 4.4L V8, 750Li Active Hybrid (F04) 4.4L V8
• Alpina B7 (F01) 4.4L V8, Alpina B7 xDrive (F01) 4.4L V8, Alpina B7L (F02) 4.4L V8
• Alpina B7L xDrive (F02) 4.4L V8, 528i (F10) 2.0L, 528i xDrive (F10) 2.0L,
• ActiveHybrid 5 (F10) 3.0L, 640i (F06) 3.0L, 650i (F06) 4.4L V8, 650i xDrive (F06) 4.4L V8
• 740Li xDrive (F02) 3.0L, ActiveHybrid 7 (F02) 3.0L, M5 (F10) 4.4L V8, 535d (F10) 3.0L
• 535d xDrive (F10) 3.0L, 640i xDrive (F06) 3.0L, M6 (F06) 4.4L V8, 740Ld xDrive (F02) 3.0L
• Alpina B6 xDrive (F06) 4.4L V8

Technical data:

• for easy and safe removal and replacement of silent blocks on front axle wishbone
• no removal of the console required, minimizing the workload
• contains spindle, spindle extension, shoulder nut spindle adaptor M10 x 1.25 made of S45C carbon steel
• spacer, pressure part, centering mandrel made from aluminium alloy

Technical data:

• for proper and quick installation of rubber bushings (silent blocks) on front axle brackets
• suitable for Audi A2, VW Polo IV 9N (2002 - 2005), Skoda Fabia I, Seat Ibiza 6L (2002 - 2006) and Cordoba 2002
• to be used as OEM 3062, 3253/8

Technical data:

• facilitates assembly and disassembly of wheel hub bearing unit
• suitable for Audi A2 and Skoda Fabia 2000- VW Polo and Seat Ibiza 2002-, VW Fox 2005-
• high-strength ball bearing fitted spindle
• pressure plate with 8 holes
• 5 pressure bolts
• 1 pair of divided dismantling shells
• 1 dismantling plate
• 1 pair of divided mounting shells
• 1 mounting plate

Technical data:

spindle:

• spindle length: 235 mm (without hexagon)
• thread: M20 x 2.0
• 22 mm hexagon drive

sleeve nut

• length 70 mm
• 30 mm hexagon drive

Technical data:

• facilitates assembly and disassembly of wheel hub bearing unit
• suitable for VW T5 and Touareg with 16" rims

scope of delivery:

• high-strength ball bearing fitted spindle
• pressure plate with 8 holes
• 5 pressure bolts
• 1 pair of divided dismantling shells
• 1 dismantling plate
• 1 pair of divided mounting shells
• 1 mounting plate

Technical data:

• for mounting the rear axle bushes without removing the rear axles
• suitable for Audi A3 (1999 - 2003), Volkswagen Golf IV, Bora (2001 - 2003) 1.4 / 1.6 / 1.8 / 2.0 and 1.9D
• the bushes can be mounted easily using a ratchet wrench or spanner

Technical data:

• used for mounting silentblocks on Fiat rear axles

suitable for following modells:

• Fiat Stilo (2001 - 2007)
• Fiat Bravo (as of 2007)
• Lancia Delta (as of 2008)

scope of delivery:

• pressure piece with recess and 3 pins
• pressure piece Ø 79 x 68 mm
• spindle M12 x 1.75 with bearing nut, length: 255 mm
• 19 mm hexagon drive socket

Technical data:

• suitable for mounting of bearings, sealing rings and rubbers
• particularly useful when used with a hydraulic press

scope of delivery:

• mounting pads in following sizes: 18 to 65 mm (1 mm steps) and 74 mm 12 mm Ø bore
• 180 mm metal handle for use with hammer

Technical data:

• for renewing the rear ball joint bushes
• assembly and disassembly
• suitable for BMW 5-series (E39), 7-series (E38)

scope of delivery:

• high-strength spindle
• hexagon nut with collar
• Drive external hexagon: 26 mm
• dismantling pressure sleeve
• dismantling holding sleeve, with bearing
• assembly holding sleeve
• mounting pressure sleeve

Technical data: