BMW

• for removing and installing the torsion spring of the valve intermediate lever
• allows quick, easy and safe handling of these high-force springs
• suitable for BMW and Mini engines B38 A15 A, B38 B15 A, B38 K15 A, B48 A20 A, B48 A20B, B48 B20 A, B48 B20B
• built in BMW 1series, 2 series, 3 series, 4 series, X1 (2015-), X2 (2018-), i8 (2014-) and MINI Hatch (2014), Clubman (2015), Countryman (2017)
• to be used as OEM 2 359 088
• is used in conjunction with Intermediate Levers Slide Block | for BMW B38 / B48 (BGS 6035)

Technical data:

Gross weight: 5750 g
To be used as OEM1: 2359088 BMW
To be used as OEM2: 2359088 MINI

• holds the sprockets during the assembly of the injection pump
• suitable for BMW engines M47 / M47T2 / M47TU / M57 / M57TU
• suitable for series: E46 (318D-320D) (1988 - 2005) and E60, E61 (318TD-320TD-525D-530D-530-535) (2000 - 2006)

Technical data:

To be used as OEM1: 13 5 191 | 13 5 192 | 13 5 190 BMW
Packaging suitable for wall hanging: Yes
Gross weight: 520 g

• suitable for timing chain driven petrol engines with vanos, engine codes N40, N45, N45T (B16)
• for the following BMW models: 116i (E81, E82, E87, E88), 316i (E46, E90)

scope of delivery:

• crankshaft timing pin to be used as OEM 119190
• timing chain pre-tensioning tool to be used as OEM 119340, 119341
• camshaft alignment tool (inlet) to be used as OEM 117252
• camshaft alignment tool (exhaust) to be used as OEM 117251
• vanos setting tool, to be used as OEM 117260

Technical data:

Gross weight: 2740 g
To be used as OEM1: 11 9 190 | 11 9 340 | 11 9 341 | 11 7 252 | 11 7 251 | 11 7 260 BMW

suitable for the following models:

• BMW 1, 3, 5, 6, 7, X3, X 5 (E34-36-38-39-66-83-90-91-92-93 series)
• Landrover Range Rover, Freelander
• Rover 75, MG, MG ZT
• Vauxhall / Opel Omega-B

engine codes:

• M41, M51, M47 M47 TU/T2, M57 TU/T2 2.0l/3.0l 1998-2008
• 204D3 / Td4, Td 6
• M47R

scope of delivery:

• timing chain counterholder, to be used as OEM BMW 113360 / Range Rover LRT-12-115
• camshaft locking tool, to be used as OEM BMW 116321 (116320) / Opel KM6267
• holder for camshaft locking tool, to be used as OEM BMW 116322 (116320)
• injection pump puller (long), to be used as OEM BMW 135120
• injection pump puller, to be used as OEM BMW 135120 / Range Rover LRT-12-119
• injection pump puller (short), to be used as OEM BMW 135191, 135192 (135190) / Opel KM6270
• threaded ring, to be used as OEM BMW 135191, 135192 (135190) / Opel KM6270
• camshaft locking tool, to be used as OEM BMW 113320 / Rover LRT-12-112
• crankshaft locking pin, to be used as OEM BMW 115180
• crankshaft locking pin, to be used as OEM BMW 116080
• tensioner locking pin, to be used as OEM BMW 113340 / Range Rover LRT-12-114 / Opel KM-823
• crankshaft locking pin, to be used as OEM BMW 112300 / Range Rover LRT-12-108
  

Technical data:

To be used as OEM3: KM-6267 | KM-6269 | KM-6268 | KM-813 | KM-823 Opel
Gross weight: 4620 g
To be used as OEM1: 11 2 300 | 11 3 320 | 11 3 340 | 11 3 360 | 11 5 180 | 11 6 080 | 11 6 320 | 11 6 321 | 11 6 322 | 13 5 120 | 13 5 190 | 13 5 191 | 13 5 192 BMW
To be used as OEM2: LRT-12-108 | LRT-12-112 | LRT-12-115 | LRT-12-114 | LRT-12-119 Land Rover

• for engine codes W10, W11, N14
• suitable for the following car models: MINI One, Cooper, Cooper S, Cooper S JC Cooper S JCW (series R50-52-53-55-56-57)

scope of delivery:

• camshaft assembling / disassembling
• crankshaft locking tool, to be used as OEM 119550, 119551 and 119552
• crankshaft locking tool, to be used as OEM 119590
• chain tensioner tool to, be used as OEM 119340

Technical data:

To be used as OEM2: 11 9 340 | 119550 | 11 9 551 | 11 9 552 | 11 9 590 MINI
To be used as OEM1: 11 9 340 | 119550 | 11 9 551 | 11 9 552 | 11 9 590 BMW
Gross weight: 3300 g

• for engine codes: N51, N52, N52K, N53, N54
• contains important tools, e. g.: camshaft assembling / disassembling, timing belt change, checking and adjustment of valve timing

suitable for the following models:

• E60 523i ,523Li, 525i, 525Li, 525xi, 528i,528xi, 530i, 530Li, 530xi, 535i, 535xi
• E61/E63 523i, 525i, 525xi, 530i, 530xi, 535xi, 630i
• E64/E65 630i, 730i
• E66/E70 730Li, X5 3.0Si
• E81/E82 130i, 135is
• E93 325i, 328i, 330i, 335i
• E83 X3 2.5i, 2.5Si, 3.0i, 3.0Si
• E85/E86 Z4 2.5i, 2.5Si, 3.0i, 3.0Si, Z4 3.0Si
• E87/E90 130i ,323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi
• E91 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi
• E92 323i ,325i, 325xi, 328i, 328xi, 330i, 330xi, 335i

scope of delivery:

• flywheel locking tool, to be used as OEM 110300
• camshaft locking tools, to be used as OEM 114280, 114281, 114282, 114283
• camshaft wheel adjusting tool, to be used as OEM 118520
• camshaft wheel adjusting tool, to be used as OEM 112904

Technical data:

Gross weight: 6110 g
To be used as OEM1: 110300 | 114280 | 114281 | 114282 | 114283 | 114290 | 118520 BMW

• for adjusting the engine timing when replacing timing chain, cylinder head repair, replacing the cylinder head gasket, etc.

scope of delivery:

• crankshaft locking tool, to be used as OEM 118570 / 119190
• camshaft locking tool, to be used as OEM 119890
• thumbscrew, to be used as OEM 119891
• depressing bar, to be used as OEM 119892
• snap gauge for intake and exhaust camshaft, to be used as OEM 119893
• spacer, to be used as OEM 119894

Technical data:

Gross weight: 2830 g
To be used as OEM1: 11 8 570 | 11 9 190 | 11 9 890 | 11 9 891 | 11 9 892 | 11 9 893 | 11 9 894 BMW

• for checking and setting camshaft timing when installing vanos adjustment unit on S54 engines

suitable for the following models:

• BMW M3 convertible (00-06), Sports Coupe (99-06), CSL Sport Coupe (03-04)
• to be used as OEM 119140, 119130119170, 117340, 115100, 17160, 112300 , 110480

Technical data:

To be used as OEM1: 11 0 480 | 11 2 300 | 11 5 100 | 11 7 160 | 11 7 340 | 11 9 130 | 11 9 140 | 11 9 170 BMW
Gross weight: 2640 g

• for checking and setting camshaft timing when e. g. working on the valve train, renewing the cylinder head gasket, etc.

suitable for the following BMW models:

• 1 (F20/21)
• 2 (F23)
• 2 Coupe (F22)
• 3 (F30/31)
• 3 Gran Turismo (F34)
• 4 Cabriolet (F33)
• 4 Coupe (F32)
• 4 Gran Coupe (F36)
• 5 (F10/11)
• 5 Gran Turismo (F07)
• X1 (E84)
• X3 (F25)
• X4 (F26)
• X5 (F15)
• Z4 (E89)

enginecode:

• N20 B16A
• N20 B20
• N20 B20A
• N20 B20B
• N20 B20B/U0
• N20 B20O0
• N26 B20
• N26 B20A

 

• to be used as OEM 119340, 2212830, 2212831, 2219548

Technical data:

Gross weight: 4550 g
To be used as OEM1: 119340, 2212830, 2212831, 2219548 BMW

• for checking and setting camshaft timing when e. g. working on the valve train, renewing the cylinder head gasket, etc.

suitable for the following models:

• BMW (N13B16) as of 09/2010
• MINI (N18 B16A, N18 B16A/M0, N18 B16C, N18 B16C/TO, N18 B16M0) as of 03/2010

• to be used as BMW OEM 117440, 119340, 496709, 119590, 2299362

Technical data:

Gross weight: 2960 g
To be used as OEM1: 117440 | 119340 | 119590 | 496709 | 2299362 BMW
To be used as OEM2: 117440 | 119340 | 119590 | 496709 | 2299362 MINI

• for releasing the tensioner when removing and installing the serpentine belt
• suitable for the following MINI models: >2007, engines EP3, EP6, N12, N14, N16 and N18
• to be used as OEM 116210
• to be used with V-ribbed belt tensioning arms from following manufaturers:
  • Dayco APV2465, Febi 33136, Gates T39127, INA 534031810, Ruville 55999, SKF VKMA33400, SNR GA350.67

scope of delivery:

• 1 tensioner wrench 21 mm, 12-point drive
• 1 tensioner wrench 30 mm, 12-point drive

Technical data:

Gross weight: 1500 g
To be used as OEM1: 116210 MINI

• for holding the flywheel when loosening and tightening the crankshaft pulley and flywheel itself
• suitable for BMW / MINI engines N40, N42, N43, N45(T), N46(T), N51, N52, N53, N54, N62, N73, M47TU, M54, M57T2(TU), S85, W17
• to be used as OEM 11 9 260, 11 9 261, 11 9 262, 11 9 263, 11 9 264, 11 9 265, 11 9 266

scope of delivery:

• 1 counterholder
• 2 spacer sleeves
• 1 reducing sleeve
• 3 fixing screws

Technical data:

To be used as OEM1: 119260 | 119261 | 119262 | 119263 | 119264 | 119265 | 119266 BMW
To be used as OEM2: 119260 | 119261 | 119262 | 119263 | 119264 | 119265 | 119266 MINI
Gross weight: 370 g

• for locking the chain tensioner
• suitable for engine codes: M43, N47, N47S, N51, N52, N52K, N53, N54, etc.

scope of delivery:

• 1 pin 3 mm, to be used as BMW OEM 114120 / 83300491012
• 1 pin 4 mm, to be used as BMW OEM 113340 / Land Rover OEM LRT 12114 / Opel OEM KM-823

Technical data:

To be used as OEM3: KM-823 Opel
To be used as OEM1: 113340 | 114120 | 83300491012 BMW
To be used as OEM2: LRT 12114 Land Rover
Gross weight: 22 g

• for adjusting and checking the engine timing on e.g. following BMW models:
  • 125i, 130i, 135i, M Coupe (E81/82/87/88) (2005-2014)
  • 323i, 325i, 330i, 335i (E90/91/92/93) (2005-2014)
  • 523i, 525i, 530i, Xi/xDrive (E60/61) (2005-2010)
  • 523i, 528i, 530i (F10/11) (2010-2011)
  • 630i (E63/64) (2004-2011)
  • 730i (E65/66) (2005-2008)
  • 730i, 740i (F01/02/04) (2008-2015)
  • X1 xDrive 25i, xDrive 28i (E84) (2009-2011)
  • X3 si, xDrive 25i, xDrive 30i (E83) (2006-2010)
  • X3 xDrive 28i (F25) (2011-2017)
  • X5 si, xDrive 30i (E70) (2006-2010)
  • X6 xDrive35i (E71) (2008-2010)
  • Z4 si (E85/86) (2006-2009)
  • Z4 sDrive23i, sDrive30i, sDrive35i (E89) (2009-2017)

scope of delivery:

• camshaft encoders fixing tool, to be used as OEM 114290, 118520
• timing chain pre-tensioning tool, to be used as OEM 119340
• camshaft locking tool, to be used as OEM 114280, 114281, 114282, 114283, 114285
• flywheel locking pin, to be used as OEM 110300

Technical data:

Gross weight: 9500 g
To be used as OEM1: 110300 | 114280 | 114281 | 114282 | 114283 | 114285 | 114290 | 118520 | 119340 BMW

• for checking and setting the engine timing
• suitable for engines B38, B48, B58, built in following models:

• 1.5 Liter BMW engines (B38):
  • 1er (F20/F21/F40) (2014-)
  • 2er (F44/F45/F46/F22/F23) (2014)
  • 3er (F30/31) (2015-)
  • 4er (F32/F36) (2015-)
  • X1 (F48) (2015-), X2 (F39) (2018-)

• 2.0 Liter BMW engines (B48):
  • 1er (F20/21) (2016-)
  • 2er (F22/F23) (2016-)
  • 3er (G20/G21/F30/F31/F34) (2015-)
  • 4er (F32/F33/F36) (2016-)
  • 5er (G30/31) (2017-)
  • 6er (G32) (2017-)
  • 7er (G11/12) (2015-)
  • X3 (G01) (2017-)
  • X4 (G02) (2018-)

• 3.0 Liter BMW engines (B58):
  • 1er (F20/F21) (2016-)
  • 2er (F22/F23) (2016-)
  • 3er (G20/G21/F30/F31/F34/F80) (2015-)
  • 4er (F32/F33/F36) (2014-)
  • 5er (G30/31) (2017-)
  • 6er (G32) (2017-)
  • 7er (G11/G12) (2015-)
  • 8er (G16) (2019-)
  • X3 (G01) (2017-)
  • X4 (G02) (2018-)
  • X5 (G05) (2018-)
  • X6 (G06) (2019-)
  • X7 (G07) (2018-)
  • Z4 (G29) (2018-)

scope of delivery:

• 1 camshaft setting tool holder, to be used as OEM 2456372
• 4 camshaft setting tool, to be used as OEM 2358122
• 1 crankshaft setting pin, to be used as OEM 2288380
• 1 crankshaft setting pin adapter, to be used as 2365488
• 1 timing chain pre-tensioning tool, to be used as OEM 2455654
• 1 crankshaft turning tool, to be used as OEM 116480
• 1 special bit socket | length 200 mm | 12.5 mm (1/2") Drive | T-Star (for Torx) T60
• 1 actuator special wrench
• 2 fixing screws, M6, internal hexagon drive, 5 mm
• 2 fixing screws, M8, external hexagon drive, 13 mm

Technical data:

To be used as OEM1: 116480 | 2288380 | 2358122 | 2365488 | 2455654 | 2456372 BMW
Gross weight: 7392 g

• for adjusting and checking the engine timing
• suitable for BMW S63 engines, built in following vehicle models:
  • BMW M5 (F10), 2010-2014
  • BMW M6 (F06/F12/F13), 2011-2014
  • BMW 650i / 650ix (F06), 2011-2014
  • BMW 7 Alpina B7LX (F02), 2013-2014
  • BMW X5 (F15), 2012-2014

 

scope of delivery:

• 1 timing chain pre-tensioning tool, to be used as OEM 83302249162 / 2249162
• 2 camshaft setting tools, to be used as OEM 83302249117 / 2249117 / 83302249140 / 2249140 / 83302249144 / 2249144 / 83302249159 / 2249159
• 1 crankshaft setting tool, to be used as OEM 118570
• 1 locking pin for crankshaft setting tool, to be used as OEM 119190

Technical data:

To be used as OEM1: 118570 | 119190 | 2249117 | 2249140 | 2249144 | 2249159 | 2249162 | 83302249117 | 83302249140 | 83302249144 | 83302249159 | 83302249162 BMW
Gross weight: 6706 g

Gross weight: 156 g$To be used as OEM1: 303-1562 Ford

• for aligning and holding the balancer shafts
• suitable for BMW engines N47D20, B47 and B48
• to be used as BMW OEM 2288054

scope of delivery:

• 1 balancer shaft alignment tool
• 2 fixing screws

Technical data:

To be used as OEM1: 2288054 BMW
Gross weight: 2526,67 g

Gross weight: 5492 g$To be used as OEM1: 110290 | 118531 | 118532 | 118533 | 118534 | 118535 | 118536 | 118537 | 118538 | 118650 BMW

• is needed for replacing the cylinder head sealing and engine timing

suitable for the following models:

• MINI One, Cooper HB, Cooper (R55-56) engine N12
• Citroen C4 (manufactured between 2008 and 2009), C4 Picasso (manufactured between 2008 and 2009)
• Peugeot 207 (manufactured between 2006 and 2009), 207CC (manufactured between 2007 and 2009), 308 (manufactured between 2001 and 2009)
• engines: 1.4 / 1.6 VTi, EP3 (8FS) EP6 (5FW), EP6C 1.6 THP, EP6DT (5FX) EP6DTS(5FY)

scope of delivery:

• crankshaft locking tool to be used as OEM 119590 / 0197-BZ
• camshaft locking tool to be used as OEM 119540 / 0197-A1 / 0197-A3
• chain tensioner to be used as OEM 119340 / 0197-M

Technical data:

To be used as OEM2: 0197-BZ | 0197-A1 | 0197-A3 | 0197-M Citroën
Gross weight: 2790 g
To be used as OEM1: 11 9 590 | 11 9 540 | 11 9 340 MINI
To be used as OEM3: 0197-BZ | 0197-A1 | 0197-A3 | 0197-M Peugeot

• for checking and adjusting the engine timing

suitable for the following BMW models:

• 1 (E81 - E82 - E87 - E88) 2006 - 2012
• 3 (E90 - E91 - E92 - E93) 2006 - 2012
• 5 (E60 - E61) 2007 - 2010
• motorcodes: N43 (B16A/AA) - N43 (B20A) - N43 (B20AA) - N43 (B20AY) - N43 (B20KO) - N43 (B20UO)

scope of delivery:

• tool for chain tensioner
• camshaft Locking tool
• balance shaft locking tool
• crankshaft locking tool

• to be used as OEM 113340 - 118690 - 118691 - 118692 - 118693 - 119340 - 119341 - 119342 - 118710 - 118711 - 118712 - 118700 - 115120

Technical data:

To be used as OEM1: 11 9 340 | 11 9 341 | 11 9 342 | 11 8 690 | 11 8 691 | 11 8 692 | 11 8 693 | 11 8 710 | 11 8 711 | 11 8 712 | 11 8 700 | 11 5 120 | 11 3 340 BMW
Gross weight: 4144 g

• for locking of the crankshaft
• for locking the flywheel (crankshaft) when loosening the flywheel screws, loosening the crankshaft pulley screws or other jobs where a locking of the crankshaft is required
• suitable for following BMW engines: M47T2, M47TU, M57T2, M57TU, M67, N45, N45T, N46, N46T, N51, N52, N53, N54, W17
• to be used as OEM 118180, 118182, 118183, 118184, 118185

Technical data:

Gross weight: 1418 g
To be used as OEM1: 11 8 180 | 11 8 182 | 11 8 183 | 11 8 184 | 11 8 185 BMW

• crankshaft locking tool with aligning pin
• to be used as OEM T10226
• suitable for e. g. VW Tourag, Phaeton

Technical data:

To be used as OEM3: T10226 Skoda
To be used as OEM1: T10226 Audi
To be used as OEM4: T10226 Volkswagen
To be used as OEM2: T10226 Seat
Gross weight: 1080 g

• for aligning the new and old version of balance shafts
• prevents noncircular engine running by misaligned balance shafts
• is required when renewing timing chain, crankshaft sealing ring, replacing the cylinder head gasket, etc.

suitable for the following models:

• BMW 1.6 (N40 / N45 / N45T, B16, B16A, B16AC) 1.8 / 2.0 (N42 / N46 / N46T) 2.0 / 3.0 (N51 / N52 / N52-Component / N53 / N54)
• PSA 1.4 / 1.6 16V (EP3 / EP6 / EP6DT / EP6DTS)
• MINI 1.4 / 1.6 (N12 / N14)

scope of delivery:

• locking tools for old and new version of balance shaft
• crankshaft locking tool
• locking pin for chain tensioner

• to be used as OEM 115140, 119280, 119330

Technical data:

To be used as OEM4: Peugeot
To be used as OEM1: 11 5 140 | 11 9 280 | 11 9 330 BMW
To be used as OEM2: 11 5 140 | 11 9 280 | 11 9 330 MINI
To be used as OEM3: Citroën
Gross weight: 1780 g

• for adjusting and checking the engine timing
• is required while dismantling and mounting the camshaft, replacing the timing chain and cylinder head gasket
• suitable for BMW Diesel engines with engine codes N47 - N47S - N57 - N57S, installed in the following vehicles:
  • 116d 118d 120d 123d, series E81 E82 E87 E88 F20
  • 316d 318d 320d 325d 330d series E90 E91 E92 E93 F30
  • 520d 525d 530d 530d GT 535d 535d GT M550d, series E60 E61 F07 F10 F11
  • 640d series F12
  • 730d 740d 750d, series F01
  • X1 1.8d 2.0d 2.3d, series E84
  • X3 1.8d 2.0d 3.0d, 3.5d series E83 F25
  • X5 3.0d 4.0d M5.0d, series E70
  • X6 3.0d 4.0d M5.0d, series E71

includes the following tools:

• crankshaft turning tool, to be used as OEM 116480
• camshaft locking tool, to be used as OEM 118760
• pump sprocket support sleeve, to be used as OEM 118740 / 118741 / 118742
• crankshaft pulley locking tool, to be used as OEM 115320

Technical data:

Gross weight: 1230 g
To be used as OEM1: 11 6 480 | 11 8 760 | 11 8 740 | 11 8 741 | 118742 | 11 5 320 BMW

• for removing the high pressure pump sprocket
• holds the pump sprocket and timing chain in position when removing the high pressure pump
• suitable for BMW engines N47, N47S, N57, N57S
• buit in the following modells:
  • 116D, 118D, 120D, 123D, type E81, E82, E87, E88, F20
  • 316D, 318D, 320D, 325D, 330D, type E90, E91, E92, E93, F30
  • 520D, 525D, 530D, 530D GT, 535D, 535D GT, M550D, type E60, E61, F07, F10, F11
  • 640D, type F12
  • 730D, 740D, 750D, type F01
  • X1-1.8D, 2.0D, 2.3D, type E84
  • X3-1.8D, 2.0D, 3.0D, 3.5D, type E83, F25
  • X5-3.0D, 4.0D, M550D, type E70
  • X6-3.0D, 4.0D, M500D, type E71
• to be used as OEM 118740 - 118741 - 118742

Technical data:

Packaging suitable for wall hanging: Yes
Gross weight: 80 g
To be used as OEM1: 118740 | 118741 | 118742 BMW

• for holding the crankshaft pulley while loosening or tightening the middle pulley bolt
• allows safe and damage-free removal / installation
• to be used as OEM 116480

Technical data:

Gross weight: 182 g
To be used as OEM1: 11 6 480 BMW

• for checking and adjusting the engine timing

suitable for the following BMW models:

• E60, E61, E63, E64, E65, E66, E53
• 540i, 545i, 550i, 645i, 650i, 735i, 740i, 745i, 750i, 760i, X5
• with engines of the series:
  • N62 B40A, B44A, B48B (manufactured between 2003 and 2010)
  • N62 B44A, B48B (manufactured between 2003 and 2010)
  • N62 B36A, B40A, B44A, B48B
  • N73 B60A (manufactured between 2002 and 2008)
  • N62 B44A, B48A (manufactured between 2003 and 2007)

scope of delivery:

• timing chain tensioner, to be used as OEM 119340
• intake camshaft lock, to be used as OEM 119461
• exhaust camshaft lock, to be used as OEM 119462
• crankshaft lock, to be used as OEM 119451
• wheel segment, to be used as OEM 113460
• spacer, to be used as OEM 119452
• socket, to be used as OEM 119454
• special ring with pointer, to be used as OEM 119453
• crankshaft pin, to be used as OEM 119190

Technical data:

Gross weight: 4710 g
To be used as OEM1: 11 3 460 | 11 9 190 | 11 9 340 | 11 9 451 | 11 9 452 | 11 9 453 | 11 9 454 | 11 9 461 | 11 9 462 | 11 9 463 BMW

• puller for BMW injection pump sprocket
• is required for the disassembly of diesel injection pumps

includes puller tools for the following applications:

• for removing the sprocket from the pump shaft, suitable for 4-cyl. and 6 cyl. BMW engines M41, M51 and identical engines in Opel/Vauxhall Omega 2.5 TD (M51)
• for removing the sprocket from the pump shaft and holding the pump wheel in the assembly position, suitable for BMW engines M47, M47TU, M57, M57TU
• for tensioning the timing chain, suitable for BMW engines M50, M60, M62
• to be used as OEM 135120, 135190, 135191, 135192, 114230

Technical data:

Gross weight: 1650 g
To be used as OEM1: 13 5 120 | 13 5 190 | 13 5 191 | 13 5 192 | 11 4 230 BMW

• for adjusting / checking the engine timing and vanos unit

suitable for the following BMW models:

• E81 (116i / 118i / 120i) E87 (118i / 120i)
• E88 (120i) E46 (316i / 316ti / 316i / 318ci / 318ti)
• E90 (318i / 320i) E91 (318i / 320i) E92 (320i)
• E93 (320i) E60 (520i) E83 (X3 2.0) E85 (Z4 2.0)

scope of delivery:

• pre-tensioning tool, to be used as OEM 119340
• sensor gear alignment tool, to be used as OEM 119350
• inlet camshaft locking tool, to be used as OEM 119292
• exhaust camshaft locking tool, to be used as OEM 119291
• flywheel locking pin, to be used as OEM 115120
• camshaft alignment tool, to be used as OEM 119270
• screw for camshaft locking tool, to be used as OEM 119293
• crankshaft locking tool, to be used as OEM 119190

Technical data:

Gross weight: 2960 g
To be used as OEM1: 11 3 350 | 11 9 293 | 11 9 292 | 11 9 291 | 11 9 340 | 11 5 120 | 11 9 270 | 11 9 190 BMW

• for disassembly and assembly of pressure springs on the valve intermediate lever
• suitable for BMW engines N20, N51, N52, N52K, N52T, N55
• ensures quick, easy and safe handling of these high-force springs
• to be used as OEM 114270

Technical data:

Gross weight: 1000 g
To be used as OEM1: 11 4 270 BMW

• for locking the crankshaft
• to be used as OEM 114320
• required when replacing the secondary drive chain
• supplementary tool for engine timing tool set for BMW BGS 8724

Technical data:

To be used as OEM1: 11 4 320 BMW
Gross weight: 360 g