Assortments

• 20 taps for internal threads and 20 dies for external threads (one each size)
  M6 x 0.75 - M8 x 1.0 - M6 x 1.0 - M8 x 1.25 - M10 x 1.25 - M10 x 1.50 - M12 x 1.50 - M14 x 1.50 - M16 x 1.50 - M18 x 1.50 - M20 x 1.50 - M22 x 1.50 - M24 x 1.50 - M12 x 1.75 - M14 x 2.0 - M16 x 2.0 - M18 x 2.5 - M20 x 2.5 - M22 x 2.5 - M24 x 3.0
• 1 adjustable tap wrench
• 1 tap holder
• 1 die holder
• 1 adaptor for die holder
• 1 Screwdriver, slot drive 6 mm

Technical data:

• imperial sizes
• 20 taps for internal threads and 20 dies for external threads (one each size):
  • fine threads: 1/4" 28UNF - 5/16" 24UNF - 3/8" 24UNF - 7/16" 20UNF - 1/2" 20UNF - 9/16" 18UNF - 5/8" 18UNF - 3/4" 16UNF - 7/8" 14UNF - 1" 14UNF
  • rough threads: 1/4" 20UNC - 5/16" 18UNC - 3/8" 16UNC - 7/16" 14UNC - 1/2" 13UNC - 9/16" 12UNC - 5/8" 11UNC - 3/4" 10UNC - 7/8" 9UNC - 1" 8UNC
• 1 adjustable tap wrench
• 1 die holder
• 1 tap holder
• 1 adaptor for die holder
• 1 screwdriver, slot drive 6 mm
• in a plastic case

Technical data:

• 20 taps for internal threads, 20 dies for external threads (one each size):
  M6 x 0,75 - M8 x 1,00 - M6 x 1,00 - M8 x 1,25 - M10 x 1,25 - M10 x 1,5 - M12 x 1,5 - M14 x 1,5 - M16 x 1,5 - M18 x 1,5 - M20 x 1,5 - M22 x 1,5 - M24 x 1,5 - M12 x 1,75 - M14 x 2,0 - M16 x 2,0 - M18 x 2,5 - M20 x 2,5 - M22 x 2,5 - M24 x 3,0
• 1 adjustable tap wrench
• 1 die holder
• 1 tap holder
• 1 adaptor for die holder
• 1 screwdriver, slot drive 6 mm
• in a plastic case

Technical data:

• especially for fine threads
• 2 die holders
• 2 tap holders
• 1 T-holder for taps
• 35 taps (starter and plug tap for each size) and dies in following sizes
  M2 x 0.4 - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M6 x 0.75 - M7 x 1.0 - M7 x 0.75 - M8 x 0.75 - M8 x 1.0 - M8 x 1.25 - M9 x 0.75 - M9 x 1.0 - M9 x 1.25 - M10 x 0.75 - M10 x 1.0 - M10 x 1.25 - M10 x 1.5 - M11 x 0.75 - M11 x 1.0 - M11 x 1.25 - M11 x 1.5 - M12 x 0.75 - M12 x 1.0 - M12 x 1.25 - M12 x 1.5 - M12 x 1.75 - M14 x 1.0 - M14 x 1.25 - M14 x 1.5 -
  M14 x 2.0 - M16 x 1.0 - M16 x 1.5 - M16 x 2.0 - M18 x 1.5
• in a plastic case

Technical data:

• 7 tap sets DIN 352
• 7 dies DIN 223
  25 x 9 mm: M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12 x 1.75
• 1 die holder 25 x 9 mm
• 1 tap wrench (DIN 1814) no. 1
• 1 screwpitch gauge
• 1 screwdriver
• in a metal case

Technical data:

• 1 magnetic bit-holder
• 6 combination drills M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 M8 x 1.25 - M10 x 1.5
• multiple applications in one operation: 1. drilling the core hole 2. cutting threads - 3. flash removal and sinking

Technical data:

• for cutting internal metric threads
• in metal case

includes the following tools:

• drill sizes: M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0M - 8 x 1.25 - M10 x 1.5 - M12 x 1.75
• 7 HSS drills for drilling the exact tapping drill hole: 2.5 - 3.3 - 4.2 - 5.0 - 6.8 - 8.5 - 10.2 mm

Technical data:

• 17 taps for internal threads and 17 dies for external threads (one each size):
  • M3 x 0.5
  • M3 x 0.6
  • M4 x 0.7
  • M4 x 0.75
  • M5 x 0.8
  • M5 x 0.9
  • M6 x 0.75
  • M6 x 1.0
  • M7 x 0.75
  • M7 x 1.0
  • M8 x 1.0
  • M8 x 1.25
  • M10 x 1.25
  • M10 x 1.5
  • M12 x 1.5
  • M12 x 1.75
• 1/8" x NPT27
• 1 adjustable tap wrench
• 1 tap holder
• 1 die holder 25 x 9 mm
• 1 tool holder with sliding handle for taps, M3 - M6, clockwise and counter-clockwise, reversible
• 1 automatic centre punch
• 5 screw extractors, heavy-duty, with square drive for tool holders, sizes 1, 2, 3, 4, 5
• 5 screw extractors, with square drive for tool holders, sizes 1, 2, 3, 4, 5
• 5 twist drills, HSS, roll forged, titanium nitrated, sizes 2.5 - 3.5 - 4.0 - 5.0 - 6.5 mm
• 1 screwpitch gauge, 12 blades, metric
• 1 screwdriver

Technical data:

• 17 taps for internal threads (one each size):
  • 4NS36
  • 6NC32
  • 8NC32
  • 10NC24
  • 10NF32
  • 12NC24
  • 1/4"NC20
  • 1/4"NF28
  • 5/16"NC18
  • 5/16"NF24
  • 3/8"NC16
  • 3/8"NF24
  • 7/16"NC14
  • 7/16"NF20
  • 1/2"NC13
  • 1/2"NF20
  • 1/8"NPT27
• 17 dies for external threads (one each size):
  • 4NS36
  • 6NC32
  • 8NC32
  • 10NC24
  • 10NF32
  • 12NC24
  • 1/4"NC20
  • 1/4"NF28
  • 5/16"NC18
  • 5/16"NF24
  • 3/8"NC16
  • 3/8"NF24,
  • 7/16"NC14
  • 7/16"NF20
  • 1/2"NC13
  • 1/2"NF20
  • 1/8"NPT27
• 1 adjustable tap wrench 1/16" - 1/2"
• 1 die holder 25 x 9 mm
• 1 tool holder with sliding handle for taps | fits 1/8" - 1/4", clockwise and counter-clockwise, reversible
• 1 automatic centre punch
• 5 screw extractors, heavy-duty, with square drive for tool holders, sizes 1, 2, 3, 4, 5
• 5 screw extractors, with square drive for tool holders, sizes 1, 2, 3, 4, 5
• 5 twist drills, HSS, roll forged, titanium nitrated, sizes 3/32" - 1/8" - 5/32" - 3/16" - 1/4"
• 1 screwpitch gauge, 12 blades, inch sizes SAE
• 1 screwdriver

Technical data:

• especially for fine threads
• 2 die holders
• 2 tap holders
• 1 T-holder for taps
• 35 taps (starter and plug tap for each size) and dies in follwing sizes
  4"-40UNC - 6"-32UNC - 8"-32UNC - 10"-24UNC - 10"-32UNF - 12"-24UNC - 1/4"-20UNC - 1/4"-28UNF - 1/4"-24UNS - 1/4"-32UNS - 5/16"-18UNC - 5/16"-24UNF - 3/8"-16UNC - 3/8"-24UNF - 7/16"-14UNC - 7/16"-20UNF - 1/2"-13UNC - 1/2"-20UNF - 9/16"-12UNC - 9/16"-18UNF - 5/8"-11UNC - 5/8"-18UNF - 3/4"-10UNC - 3/4"-16UNF - M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - M10 x 1.0 - M11 x 1.5 - M12 x 1.25 - M12 x 1.75 - M14 x 1.25 - M18 x 1.5 - 1/8"-27NP - 1/4"-18NPT
• in a plastic case

Technical data:

• 7 tap sets DIN 352
• 7 dies DIN 223
  25 x 9 mm: M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12 x 1.75
• 1 die holder 25 x 9 mm
• 1 tap wrench (DIN 1814) no. 1
• 1 screwpitch gauge
• 1 screwdriver
• in a metal case

Technical data:

includes the following tools:

• twist drills: Ø 2.5 - 3.3 - 4.2 - 5.0 - 6.8 - 8.5 - 10.2 mm
• twist drills manufactured in accordance with DIN 338: M3 - M4 - M5 - M6 - M8 - M10 - M12, tops manufactured in accordance with DIN 371/376 B

Technical data: