Special Pullers

• high and even build-up of strength
• for a controlled and safe removal
• produces up to 10 t pressure
• to be used with BGS 3051, 7681, 7729, 7774
• can be operated by toggle
• hydraulic piston stroke: 13.5 mm
• hydraulic cylinder outer thread: UN 1-1/2"x16

Technical data:

Gross weight: 1340 g

• suitable for removing bearings, bushings, sleeves, etc.
• especially suitable for dismantling blind holes

scope of delivery:

• sliding hammer 1430 g, 370 mm
• spreader claw, 10 - 14 mm
• spreader claw, 15 - 19 mm
• spreader claw, 18 - 25 mm
• spreader claw, 25 - 32 mm

Technical data:

Packaging suitable for wall hanging: No
Gross weight: 4064 g

• for dismantling of bearings installed in a blind hole
• is used when repairing gearboxes, for example

scope of delivery:

• slide hammer, weight: 900 g, length: 290 mm
• 2-feet puller with spindle, 125 mm
• 1 spreader claw 5 - 10 mm
• 1 spreader claw 8 - 12 mm
• 1 spreader claw 13 - 18 mm
• 1 spreader claw 23 - 29 mm
• 1 spreader claw 27 - 31 mm
• 1 spreader claw 32 - 35 mm
• 1 spreader claw 36 - 42 mm
• 1 spreader claw 42 - 46 mm
• 1 spreader claw 47 - 52 mm

Technical data:

Packaging suitable for wall hanging: No
Gross weight: 5366 g

• puller bolt and adaptors for use with slide hammer and two-arm pullers

includes the following tools:

• 1 sliding hammer 910 g, length: 285 mm
• 1 puller with puller width 125 mm
• 5 extraction mandrels for extracting of bearings with inner diameter 7 - 29 mm
• 3 adaptors for extracting components with internal thread M6 x 1.0 - M8 x 1.25 - M10 x 1.5

Technical data:

Min. clamping width: 6 mm
Gross weight: 3540 g
Max. clamping width: 30 mm
Wrench size 1: 12 / 24 mm
Clamping depth: 125 mm
Hook length: 17 mm
Spindle length: 125 mm

• from blind hole bearing puller set BGS 7710

Technical data:

Gross weight: 670 g

• from blind hole bearing puller set BGS 7710

Technical data:

Gross weight: 140 g

• from blind hole bearing puller set BGS 7710

Technical data:

Gross weight: 160 g

• hydraulic ram 10 ton
• 2 extension rods
• one twin head and one triple head
• 3 legs each in following lengths: 100, 150 und 200 mm
• max. pulling width
  • 240 mm at 100 mm puller legs length
  • 280 mm at 150 mm puller legs length
  • 300 mm at 200 mm puller legs length
• clamping width (A) min. / max. in mm: min. 14 mm / max. 62 mm
• puller bolt receiving thread (B): 5/8" x 18 UNF
• clamping bolt distance (C) in mm: 111 mm
• camping bolt thread (D): 5/8" x 18 UNF
• puller bolt distance (E) min. / max. in mm: min. 64 mm / max. 210 mm

Technical data:

Gross weight: 18240 g

• external puller for deeply set bearings etc.
• hardened

Technical data:

Spindle length: 285 mm
Drive: Slinding Handle
Material: Chrome Vanadium Steel
Gross weight: 1090 g
Clamping depth: 235 mm
Hook length: 13,5 mm
Packaging suitable for wall hanging: Yes
Min. clamping width: 10 mm
Hex drive size: 14 mm
Max. clamping width: 50 mm
Hook foot thickness at the top: 4 mm
Hooked footh: 7,5 mm

• for shaft seals
• hardened carbon steel
• external triple leg puller 40 to 80 mm
• internal triple leg puller 50 to 150 mm
• 1 deep puller
• 1 convex screw connection

Technical data:

Gross weight: 4660 g

• all-purpose
• esp. for Opel and Ford
• leg length optional 87 or 153 mm

Technical data:

Gross weight: 1520 g

• for pulling and installing of belt pulleys on power steering pumps, generators, fan wheels, etc.
• 2 cross beams: 140 mm, 230 mm
• 2 pairs of straight pullers: length: 60 mm, 110 mm
• 1 pair of specifically formed pullers length 60 mm
• all pullers and cross beams can be combined
• suitable for pulleys up to Ø 200 mm

Technical data:

Gross weight: 4230 g

• pulling range 40 - 168 mm
• for generators, air conditioners, water pumps
• includes 10 mm hex wrench

Technical data:

Gross weight: 1520 g

1. draws pulleys by the holes without causing damage
2. suitable for different bolt patterns and distances
3. 8 slots for holding pulling legs in different positions
4. 18 mm pulling legs
5. Ø 16 mm spindle with centering ball 24 mm drive

Technical data:

Gross weight: 840 g

• for removing of bearing ring and sleeves
• ultra sharp jaw edges allow to clamp in between 0.5 mm
• suitable for bearing rings and sleeve diameters from 10 to 125 mm
• extractor can be pre-tensioned by closing the cone

Technical data:

Gross weight: 3600 g

• for removing pulleys and camshaft sprockets
• pulling arms are interconnected by adjusting disc, this allows easy and precise setting of pulling arms
• stepless range of pulling arms: from 42 to 82 mm adjustable
• pulling depth: 27 mm

includes the following tools:

• 3 pulling arms, Ø 12 mm, M10 x 1.5 suitable for material thickness up to max. 10 mm
• puller body with 6 grooves and adjusting disc
• spindle M14 x 1.5, 19 mm hexagon, with centering ball

Technical data:

Gross weight: 1030 g