Main page » Tools » BGS » Electric / Cordless Battery Tools » Induction Heater

Induction Heater

principle of operation:

there is an alternating magnetic field, the metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up
allows heating of screws/nuts without heating surrounding components too much or even destroying them, as it is often the case when heated with a torch
within the shortest possible time, e.g. rusty nuts are heated and can be loosened
using on e. g. ball joint pinch bolts and other items on axle and engine
a formless coil (length: 800 mm) allows using the device also for heating of components (bearings, etc.) e.g. bearings in which the heating facilitates disassembly or assembly
includes the following induction coils
- induction coil: 19 mm, length: 220 mm (for Ø 10-16 mm)
- induction coil: 27 mm, length: 220 mm (for Ø 17-24 mm)
- induction coil: 50 mm, length: 235 mm (for heating small surfaces)
- formless coil, 800 mm, for heating of components
max. power: 1.5 kW
max. current: 7.5 A

Technical data:

Max. operating temperature: 900 °C
Power supply frequency: 50 - 60 Hz
Length: 200 mm
Width: 140 mm
Power supply voltage (AC): 230 V
Height: 75 mm
Protection class: IP20
Gross weight: 5166 g

RRP 1.248,70 EUR
Only 700,70 EUR

incl. 19% tax excl. Shipping costs

Induction Coil Set for Induction Heater | angled 90° | for BGS 2169, 3390, 3391 | 8 pcs.

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
angled 90° type
wire diameter: 4 mm
coil height: approx. 23 mm
length approx. 220 mm
includes coils with the following internal diameters
15 - 19 - 20 - 23 - 26 - 32 - 38 - 45 mm

Technical data:

Gross weight: 1100 g

RRP 376,98 EUR
Only 254,59 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | 32 mm | angled 90° | for BGS 2169, 3390, 3391

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
angled 90° type
wire diameter: 4 mm
coil height: approx. 23 mm
length approx. 220 mm
coil internal diameter approx. 32 mm

Technical data:

Gross weight: 100 g

RRP 74,13 EUR
Only 37,59 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | 38 mm | angled 90° | for BGS 2169, 3390, 3391

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
angled 90° type
wire diameter: 4 mm
coil height: approx. 23 mm
length approx. 220 mm
coil internal diameter approx. 38 mm

Technical data:

Gross weight: 100 g

RRP 74,13 EUR
Only 37,59 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | 45 mm | angled 90° | for BGS 2169, 3390, 3391

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
angled 90° type
wire diameter: 4 mm
coil height: approx. 23 mm
length approx. 220 mm
coil internal diameter approx. 45 mm

Technical data:

Gross weight: 100 g

RRP 80,27 EUR
Only 41,90 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | for Tie Rods | 65 mm | for BGS 2169, 3390, 3391

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
bented type
wire diameter: 4.5 mm
length approx. 215 mm
coil internal diameter approx. 27.5 mm

Technical data:

Gross weight: 100 g

RRP 89,42 EUR
Only 58,89 EUR

incl. 19% tax excl. Shipping costs

Induction Coil Set for Induction Heater | for BGS 2169, 3390, 3391 | 12 pcs.

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391

scope of delivery:

1 Induction Coil | flat (BGS 2169-5)
1 Induction Coil | for Tie Rods (BGS 2169-10)
1 Induction Coil | for small surfaces (BGS 2169-9)
1 Ferrite Core for BGS 2169-9
1 Retaining Spring for BGS 2169-9
1 Induction Coil | with ceramic protection (BGS 2169-8)
1 Induction Coil | 20 mm | angled 90°
1 Induction Coil | 23 mm | angled 90°
1 Induction Coil | 26 mm | angled 90°
1 Induction Coil | 32 mm | angled 90° (BGS 2169-1-32)
1 Induction Coil | 38 mm | angled 90° (BGS 2169-1-38)
1 Induction Coil | 45 mm | angled 90° (BGS 2169-1-45)

Technical data:

Gross weight: 1300 g

RRP 590,99 EUR
Only 375,79 EUR

incl. 19% tax excl. Shipping costs

Induction Coil Set for Induction Heater | straight type | for BGS 2169, 3390, 3391 | 8 pcs.

for heating screws, nuts, shafts, etc.
suitable for induction heater product 2169, 3390, 3391
straight type
wire diameter: 4 mm
coil width: approx. 23 mm
length approx. 230 mm
includes coils with the following internal diameters
15 - 19 - 20 - 23 - 26 - 32 - 38 - 45 mm

Technical data:

Gross weight: 1100 g

RRP 376,98 EUR
Only 254,59 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | 32 mm | straight type | for BGS 2169, 3390, 3391

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
straight type
wire diameter: 4 mm
coil height: approx. 23 mm
length approx. 230 mm
coil internal diameter approx. 32 mm

Technical data:

Gross weight: 100 g

RRP 74,13 EUR
Only 37,59 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | 38 mm | straight type | for BGS 2169, 3390, 3391

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
straight type
wire diameter: 4 mm
coil height: approx. 23 mm
length approx. 230 mm
coil internal diameter approx. 38 mm

Technical data:

Gross weight: 100 g

RRP 74,13 EUR
Only 37,59 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | 45 mm | straight type | for BGS 2169, 3390, 3391

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
straight type
wire diameter: 4 mm
coil height: approx. 23 mm
length approx. 230 mm
coil internal diameter approx. 45 mm

Technical data:

Gross weight: 100 g

RRP 80,27 EUR
Only 41,90 EUR

incl. 19% tax excl. Shipping costs

Induction Wire for Induction Heater | for BGS 2169, 3390, 3391

for heating flanges, bearing housing, shafts, gears, exhaust connections, etc.
malleable, therefore universal application
suitable for induction heater BGS 2169, 3390, 3391
wire diameter: 4 mm
wire length: 800 mm

Technical data:

Gross weight: 100 g

RRP 88,42 EUR
Only 58,89 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | 19 mm | angled 90° | for BGS 2169, 3390, 3391

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
angled 90° type
wire diameter: 4 mm
coil height: approx. 23 mm
length approx. 230 mm
coil internal diameter approx. 19 mm

Technical data:

Gross weight: 100 g

RRP 60,56 EUR
Only 36,20 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | flat | for BGS 2169, 3390, 3391

for heating of e.g. metal sheets
suitable for induction heater BGS 2169, 3390, 3391
wire diameter: 4 mm
length approx. 230 mm

Technical data:

Gross weight: 100 g

RRP 67,70 EUR
Only 40,50 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | 25 mm | angled 90° | for BGS 2169, 3390, 3391

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2169, 3390, 3391
angled 90° type
wire diameter: 4 mm
coil height: approx. 23 mm
length approx. 230 mm
coil internal diameter approx. 25 mm

Technical data:

Gross weight: 100 g

RRP 67,70 EUR
Only 40,50 EUR

incl. 19% tax excl. Shipping costs

Induction Coil for Induction Heater | with ceramic protection | for BGS 2169, 3390, 3391

allows an optimum distance for heating components
high temperature resistance
suitable for induction heater BGS 2169, 3390, 3391

Technical data:

Gross weight: 10 g

RRP 149,70 EUR
Only 91,39 EUR

incl. 19% tax excl. Shipping costs

Induction Coil, for Induction Heater | for small surfaces | for BGS 2169, 3390, 3391

allows a pinpoint heating
especially suitable for heating of components which are difficult to access e.g. bearing rings in gearboxes, etc.
suitable for induction heater BGS 2169, 3390, 3391

Technical data:

Gross weight: 10 g

RRP 133,13 EUR
Only 80,10 EUR

incl. 19% tax excl. Shipping costs

Induction Heater | Trucks / Agricultural Machines | liquid cooled | 3.7 kW

principle of operation:

extra strong heater for trucks and agricultural machines
there is an alternating magnetic field, the metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up
allows heating of screws/nuts without heating surrounding components too much or even destroying them, as it is often the case when heated with a torch
within the shortest possible time, e.g. rusty nuts are heated and can be loosened
using for e.g. ball joint pinch bolts and other items on axle and engine
input power max. 3.5 kW
output induction power max. 3.7 kW
max. current 16 A

scope of delivery:

1 induction heater
1 hose-/induction cable, length 2 m
1 coolant reservoir 2.5 l (BGS 2170-5)
1 focus coil, 90° angled, length 40 mm, width 20 mm

Technical data:

Gross weight: 14110 g
Length: 440 mm
Power supply voltage (AC): 230 V
Width: 240 mm
Max. operating temperature: 900 °C
Net weight (kg): 11,5 kg
Power supply frequency: 50 - 60 Hz
Protection class: IP22
Height: 200 mm

RRP 5.712,84 EUR
Only 3.949,60 EUR

incl. 19% tax excl. Shipping costs

Coil Extension | 85 mm | for BGS 2170

suitable for induction heater BGS 2170
to extend the coil by 85 mm

Technical data:

Gross weight: 100 g

RRP 185,56 EUR
Only 112,69 EUR

incl. 19% tax excl. Shipping costs

Focus Coil | angled 20° | for BGS 2170

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2170
20° angled type
coil length: 40 mm
coil width: 20 mm

Technical data:

Gross weight: 300 g

RRP 685,56 EUR
Only 464,99 EUR

incl. 19% tax excl. Shipping costs

Focus Coil | straight | for BGS 2170

for heating screws, nuts, shafts, etc.
suitable for induction heater BGS 2170
straight type
coil length: 42 mm
coil width: 20 mm
coil depth: 38 mm

Technical data:

Gross weight: 300 g

RRP 685,56 EUR
Only 464,99 EUR

incl. 19% tax excl. Shipping costs

Coolant Liquid | 3 l | for BGS 2170

suitable for induction heater BGS 2170

Technical data:

Gross weight: 3200 g

RRP 71,27 EUR
Only 46,09 EUR

incl. 19% tax excl. Shipping costs

Induction Heater | 1.2 kW

compact, lightweight handheld induction heater
with LED lightning
principle of operation:
- there is an alternating magnetic field, the metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats up

allows heating of screws/nuts without heating surrounding components too much or even destroying them, as it is often the case when heated with a torch
within the shortest possible time, e.g. rusty nuts are heated and can be loosened
using on e. g. ball joint pinch bolts and other items on axle and engine
a formless coil (length: 800 mm) allows using the device also for heating of components (bearings, etc.) e.g. bearings in which the heating facilitates disassembly or assembly

includes the following induction coils:
- induction coil: 19 mm, length: 220 mm (for Ø 10 - 16 mm)
- induction coil: 27 mm, length: 220 mm (for Ø 17 - 24 mm)
- induction coil: 50 mm, length: 235 mm (for heating small surfaces)
- formless coil, 800 mm, for heating of components

current: 6.3 A

Technical data:

Max. heating capacity: 1,2 kW
Weight: 1 kg
Power supply frequency: 50 - 60 Hz
Length: 412 mm
Protection class: IP20
Power supply voltage (AC): 230 V
Max. operating temperature: 900 °C
Height: 110 mm
Width: 213 mm

RRP 770,00 EUR
Only 530,69 EUR

incl. 19% tax excl. Shipping costs