Specials

• supplies a constant 6.3 bar outlet pressure regardless of the inlet pressure
• prevents excessive operating pressure and is suitable for most pneumatic tools
• saves energy and increases the service life of compressed air tools
• light and compact design
• no additional pressure gauge required

• inlet pressure max.: 10 bar (145 PSI)
• outlet pressure: constant 6.3 bar (90 PSI)
• accuracy: 10 %
• flow rate: 1300 l/min (45 CFM)
• inlet thread: 6.3 mm (1/4")
• outlet thread: 6.3 mm (1/4")

Technical data:

Length: 61 mm
Gross weight: 108 g

• suitable for tightening screw connections according to the specified torque
• can be used as a torque attachment with any drive element such as a conventional reversible ratchet
• for controlled clockwise and counterclockwise tightening
• very high measuring accuracy, documented with a test certificate
• large illuminated LCD display
• display mode: Track (concurrent display) and Peak (peak value detection)
• with automatic switch-off function
• reaching the desired torque is indicated by an acoustic signal (buzzer)
• resolution: 0.1 Nm
• memory capacity: 50 data sets
• operation modes: Peak & Trace
• unit selection: Kg-cm, Ib-in, Ib-ft, N-m
• storage temperature: -20 °C - 70 °C (-4 °F - 157.9 °F)

Technical data:

Weight: 350 g
Min. torque: 27 Nm
Drive profile: Internal square
Humidity: 15 - 90 %
Gross weight: 334 g
Output profile: External square
Width: 35 mm
Length: 125 mm
Battery type: 2 x AAA | 1,5 V
Drive profile size, inch: 3/8 "
Operating temperature: -10 - 60 °C
Max. torque: 135 Nm
Release accuracy: +/- 2 %
Drive profile size, metric: 10 mm
Height: 35 mm

• hot forged
• chrome-plated, polished jaws
• deep offset ring
• profile: 12-point

Technical data:

Wrench size 1: 16 mm
Gross weight: 180 g
Material: Chrome Vanadium Steel
Wrench size 2: 17 mm
Offset head/s: Yes

• ShA 85° +/- 5
• universally suitable
• suitable for auto lifts

Technical data:

Width: 120 mm
Height: 60 mm
Material: Rubber
Gross weight: 1470 g
Length: 160 mm

• cold forged size spanner length
• deep offset ring
• profile: 12-point
• packed in a tetron wallet

includes the following tools:

• double ring spanner, deep offset ends: 6 x 7 mm
• double ring spanner, deep offset ends: 8 x 9 mm
• double ring spanner, deep offset ends: 10 x 11 mm
• double ring spanner, deep offset ends: 12 x 13 mm
• double ring spanner, deep offset ends: 14 x 15 mm
• double ring spanner, deep offset ends: 16 x 17 mm
• double ring spanner, deep offset ends: 18 x 19 mm
• double ring spanner, deep offset ends: 20 x 22 mm
• double ring spanner, deep offset ends: 21 x 23 mm
• double ring spanner, deep offset ends: 24 x 27 mm
• double ring spanner, deep offset ends: 25 x 28 mm
• double ring spanner, deep offset ends: 30 x 32 mm

Technical data:

Offset head/s: Yes
Surface finish: Satin chrome plated
Offset angle 2: 75 °
Offset angle 1: 75 °
Material: Chrome Vanadium Steel
Gross weight: 3460 g

• country-specific connection standard for adaption with BGS pneumatic tools
• application area: USA, France

Technical data:

Gross weight: 22 g