Specials

• for drilling shallow holes with different diameters in soft and medium hard wood
• also suitable as an accessory for electricians and other installers for drilling holes in wood for cables, pipes and other installations
• with center point for fixing the drill on the workpiece
• on both sides with angled sharp cutting edges for quick penetration into the wood
• enables clean drilling
• specially hardened for long service life
• embossed size information on the drill bits
• hexagonal shaft for use with three-jaw drill chucks
• practical set composition with different diameters 10, 12, 16, 18, 20 and 25 mm

Technical data:

Packaging suitable for wall hanging: Yes
Material: Carbon Steel
Gross weight: 262 g
Diameter: 10 | 12 | 16 | 18 | 20 | 25 mm
Length: 150 mm

• partly PU coated
• good fit and secure grip
• good sense of touch
• knitwrist
• suitable for: tire service

Technical data:

DIN standard: EN 388 - CAT II (3131X)
Gross weight: 50 g
Size: 9 (L)

• for both manual and impact wrenches
• can be fixed on impact wrench by pin and O-ring
• suitable for cylinder head screws on MAN M2000 and buses with D08 engines

Technical data:

Material: Chrome Molybdenum Steel
Output profile: E-Type
Drive profile size, metric: 20 mm
Drive profile: Internal square
Drive profile size, inch: 3/4 "
Length: 110 mm
Wrench size: E18
Gross weight: 434 g

• for aligning the clutch
• required when installing a new clutch in a 6-speed manual transmissions

suitable for following vehicle models:

• MINI Cooper
• MINI Cooper S

• to be used as OEM 21 2 210 (83300494261)

Technical data:

To be used as OEM1: 212260 MINI
Gross weight: 1312 g

• resolution: 0.01 mm
• Measuring range 5 mm
• diameter 41 mm

Technical data:

To be used as OEM1: KM 571-A Opel
To be used as OEM2: 3313 | VAS6079 Volkswagen
Gross weight: 70 g

• for both manual and impact wrenches
• can be fixed on impact wrench by pin and O-ring

Technical data:

Wrench size: 32 mm
Surface finish: Phosphated
Output profile: Hexagon
Drive profile: Internal square
Gross weight: 450 g
Material: Chrome Molybdenum Steel
Drive profile size, metric: 20 mm
Drive profile size, inch: 3/4 "

• for checking and adjusting the engine timing on VAG 2.4, 2.8, 3.0L petrol engines

scope of delivery:

• 1 camshaft locking tool, to be used as OEM T40070
• 1 crankshaft pulley holding tool, to be used as OEM T10355
• 1 chain tensioner locking tool, to be used as OEM T40071
• 1 camshaft locking tool, to be used as OEM T40133
• 1 setting wrench for camshaft adjuster, to be used as OEM T40269
• 1 setting wrench for camshaft adjuster, to be used as OEM T40079
• 1 crankshaft rotating tool, to be used as OEM T40058
• 1 XZN bit socket 14 mm, length 45 mm, to be used as OEM T10035
• 1 XZN bit socket 14 mm, length 80 mm
• 1 crankshaft locking pin, to be used as OEM T40069
• 1 crankshaft locking pin, to be used as OEM T3242

Technical data:

To be used as OEM4: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Volkswagen
To be used as OEM3: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Skoda
To be used as OEM2: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Seat
Gross weight: 5110 g
To be used as OEM1: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Audi

• strokes per min.: 9000
• stroke: 10 mm
• working pressure: 6.2 bar (90 psi)
• air consumption: 48.2 l/min (1.7 cfm)
• compressed air connection 6,3 mm (1/4")
• recommended hose Ø: 10 mm
• max. material thickness: 1.6 mm steel
• noise level: LPA 77 dB(A), LWA 84 dB(A)
• vibration level: ah 3 m/s² / K=1.5 m/s²

Technical data:

Gross weight: 552 g
Length: 182 mm