Specials

• easy to unroll and can be cut individually
• in a cardboard dispenser

Technical data:

Length: 8 m
Max. temperature resistance: 125 °C
Diameter: 3 mm
Colour: Red
Gross weight: 120 g

• robust welded, stable and varnished steel construction
• ideal for workshop use for repairs below the vehicle
• also suitable for the in-house workshop to carry out small vehicle repairs yourself
• easy to store
• for flexible use on even surfaces
• loadable up to 2000 kg in pairs
• permissible tire width 195 mm (incl. 20 mm lateral safety distance, total inner width 215 mm)
• delivery in pairs
• for all common passanger and small vans
• to be used in pairs only!

• load: 2000 kg (pair)
• tire width: 195 mm
• drive-up height: 160 mm

Technical data:

Width: 300 mm
Material: Steel
Length: 910 mm
Height: 250 mm

• for cleaning aluminium callipers
• silm design allows working in areas with restricted access
• 2 component plastic handle with hanging hole
• size: 90 x 22 mm

Technical data:

Gross weight: 84 g

• for time-saving pre-tightening of wheel bolts and nuts with impact wrenches
• automatic tightening stop prevents damage to rims and bolts
• combines the speed of impact wrenches with the precision of torque wrenches
• absorbs excessive torque and limits it to the required torque
• for use with impact wrench
• can be fixed on impact wrench by pin and O-ring

Technical data:

Max. torque: 500 Nm
Length: 305 mm
Drive profile size, metric: 25 mm
Wrench size: 32 mm
Drive profile size, inch: 1 "
Material: Chrome Molybdenum Steel
DIN standard: 3121
Output profile: Pro Torque® (Hexagon)
Gross weight: 1896 g
Drive profile: Internal square

• for damage-free installation of the rear crankshaft seal ring

suitable for:

• Scania (114) 340/360/380

• suitable for seal rings 140x160x12 mm (OE 1433183)

Technical data:

Gross weight: 4278 g

• for pressure loss and compression measurements on diesel and gasoline engines
• includes adapters for glow plug and spark plug threads

suitable for the following models:

• Alfa Romeo, Audi, BMW, Chrysler, Citroën, Daewoo, Fiat, Ford, Honda, Hyundai, Isuzu, Jeep, Kia, Lada, Lancia, Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Range Rover, Renault, Rover, Saab, Seat, Skoda, Suzuki, Toyota, Vauxhall, Volvo, VW
• dial gauge for pressure loss and compression measurements are required
• the following sets or dial gauges are suitable:
  • Compression Tester Set for Petrol and Diesel engines (BGS 8400)
  • Compression and Pressure Loss Tester Set for Petrol and Diesel engines (BGS 8401)
  • Compression Tester Set for Diesel engines (BGS 8008)

scope of delivery:

• adapter for glow plug thread M10 x 1.25 | a=11 | b=8 mm
• adapter for glow plug thread M12 x 1.25 | a=12 | b=8 mm
• adapter for glow plug thread M12 x 1.25 | a=11 | b=47 mm
• adapter for glow plug thread M10 x 1.25 | a=22.5 b=23.5 mm
• adapter for glow plug thread M10 x 1.25 | a=18.5 | b=10.5 mm
• adapter for glow plug thread M10 x 1.25 | a=28 | b=16 mm
• adapter for glow plug thread M10 x 1.25 | a=23 | b=9.5 mm
• adapter for glow plug thread M10 x 1.25 | a=28 | b=55 | c=3 mm
• adapter for glow plug thread M10 x 1.25 | a=26 | b=59 mm
• adapter for glow plug thread M10 x 1.25 | a=29 | b=73 mm
• adapter for glow plug thread M10 x 1.25 | a=15 | b=27 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=23 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=31 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=14 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=59 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=47 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=42 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=64 | c=5 mm
• adapter for glow plug thread M10 x 1.0 | a=12 | b=57 | c=5 mm
• adapter for glow plug thread M8 x 1.0 | a=18 | b=52 mm
• clamp adaptor without thread
• adapter for spark plug thread M10 x 1.0
• adapter for spark plug thread M12 x 1.25
• adapter for spark plug thread M18 x 1.5
• test hose for spark plug adapter
• angle piece with quick coupler
• valve turning tool to change the adapter valves
• replacement O-ring and valves

Technical data:

Gross weight: 1344 g

• for safe working in the area of voltaged parts
• reduces the risk of short circuits
• perfect tool for electricians and electrical specialists
• for installation of terminals and sleeves, conductor connections, screwing of busbars
• drop-forged
• VDE insulated up to 1000 V, according to EN 60900/IEC 60900

Technical data:

Gross weight: 78 g
Material: Chrome Vanadium Steel
Jaw: 15 °
Packaging suitable for wall hanging: Yes
DIN standard: EN/IEC 60900
Wrench size: 14 mm