Specials

Impact Bit Socket | length 75 mm |12.5 mm...

suitable for both manual and impact wrenches
can be fixed on impact wrench by pin and O-ring

Technical data:

Output profile size: 19 mm
Gross weight: 220 g
Material: Chrome Molybdenum Steel
Drive profile: Internal square
Length: 75 mm
Output profile: Internal hexagon
Max. torque: 682 Nm
Drive profile size, inch: 1/2 "
Drive profile size, metric: 12,5 mm

RRP 13,70 EUR
Only 6,50 EUR

Flat Milling Drill Set | 10 - 25 mm | 6 pcs....

for drilling shallow holes with different diameters in soft and medium hard wood
also suitable as an accessory for electricians and other installers for drilling holes in wood for cables, pipes and other installations
with center point for fixing the drill on the workpiece
on both sides with angled sharp cutting edges for quick penetration into the wood
enables clean drilling
specially hardened for long service life
embossed size information on the drill bits
hexagonal shaft for use with three-jaw drill chucks
practical set composition with different diameters 10, 12, 16, 18, 20 and 25 mm

Technical data:

Packaging suitable for wall hanging: Yes
Material: Carbon Steel
Gross weight: 262 g
Diameter: 10 | 12 | 16 | 18 | 20 | 25 mm
Length: 150 mm

RRP 12,78 EUR
Only 5,50 EUR

Combination Spanner | offset | 18 mm

cold forged size spanner length
Matt chrome
deep offset ring end
profile ring end: 12-point

Technical data:

Material: Chrome Vanadium Steel
Wrench size 2: 18 mm
Length: 240 mm
Gross weight: 190 g
Wrench size 1: 18 mm
Offset head/s: Yes

RRP 11,70 EUR
Only 5,50 EUR

Impact Bit Socket | length 75 mm | 12.5 mm...

suitable for both manual and impact wrenches
can be fixed on impact wrench by pin and O-ring

Technical data:

Drive profile: Internal square
Gross weight: 100 g
Output profile size: M8
Material: Chrome Molybdenum Steel
Length: 75 mm
Max. torque: 52 Nm
Output profile: Spline (for XZN)
Drive profile size, metric: 12,5 mm
Drive profile size, inch: 1/2 "

RRP 13,55 EUR
Only 5,80 EUR

Clutch Alignment Tool | for MINI

for aligning the clutch
required when installing a new clutch in a 6-speed manual transmissions

suitable for following vehicle models:

MINI Cooper
MINI Cooper S

to be used as OEM 21 2 210 (83300494261)

Technical data:

To be used as OEM1: 212260 MINI
Gross weight: 1312 g

RRP 85,64 EUR
Only 56,60 EUR

Combination Spanner | offset | 8 mm

cold forged size spanner length
Matt chrome
deep offset ring end
profile ring end: 12-point

Technical data:

Wrench size 1: 8 mm
Offset head/s: Yes
Material: Chrome Vanadium Steel
Gross weight: 30 g
Length: 125 mm
Wrench size 2: 8 mm

RRP 5,84 EUR
Only 3,00 EUR

Impact Bit Socket | length 75 mm | 12.5 mm...

suitable for both manual and impact wrenches
can be fixed on impact wrench by pin and O-ring

Technical data:

Drive profile size, metric: 12,5 mm
Drive profile: Internal square
Output profile: T-Star (for Torx)
Length: 75 mm
Gross weight: 100 g
Material: Chrome Molybdenum Steel
Drive profile size, inch: 1/2 "
Output profile size: T50
Max. torque: 127 Nm

RRP 13,84 EUR
Only 5,80 EUR

Engine Timing Tool Set | for VAG 2.4, 2.8,...

for checking and adjusting the engine timing on VAG 2.4, 2.8, 3.0L petrol engines

scope of delivery:

1 camshaft locking tool, to be used as OEM T40070
1 crankshaft pulley holding tool, to be used as OEM T10355
1 chain tensioner locking tool, to be used as OEM T40071
1 camshaft locking tool, to be used as OEM T40133
1 setting wrench for camshaft adjuster, to be used as OEM T40269
1 setting wrench for camshaft adjuster, to be used as OEM T40079
1 crankshaft rotating tool, to be used as OEM T40058
1 XZN bit socket 14 mm, length 45 mm, to be used as OEM T10035
1 XZN bit socket 14 mm, length 80 mm
1 crankshaft locking pin, to be used as OEM T40069
1 crankshaft locking pin, to be used as OEM T3242

Technical data:

To be used as OEM4: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Volkswagen
To be used as OEM3: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Skoda
To be used as OEM2: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Seat
Gross weight: 5110 g
To be used as OEM1: T3242 | T10035 | T10355 | T40058 | T40069 | T40070 | T40071 | T40079 | T40133 | T40269 Audi

RRP 271,36 EUR
Only 185,50 EUR

Infinite Scroll für Gambio